Black Box Agility KVM Over IP-Matrix Transmitter - DVI-D, USB 2.0

Experience enterprise-grade flexibility with the Black Box Agility KVM Over IP-Matrix Transmitter. Built for data centers, control rooms, and scalable office deployments, this transmitter expands your reach by leveraging standard IP networks. Configure your network for a point-to-point extension, KVM switching, single-target sharing, or multicasting, delivering seamless access to a host system from multiple remote locations. Keyboard and mouse emulation, along with emulation for other standard Human Interface Devices (HIDs) such as touch screens or USB drives, ensure a smooth, plug-and-play user experience across distances that are only limited by your network capabilities.

With Agility’s robust KVM over IP matrix capabilities, you gain centralized control without the need for dedicated fiber runs or expensive dedicated cabling. The transmitter supports DVI-D digital video, USB 2.0 peripherals, and a full suite of HID support, enabling you to work with high-resolution displays, diverse input devices, and a broad ecosystem of USB accessories. Whether you’re extending a single workstation, sharing a target among multiple operators, or multicast-distributing a single source to several displays, this transmitter is engineered to deliver reliable performance, low latency, and scalable growth as your environment evolves.

Designed to fit a range of IT environments, the Agility KVM Over IP-Matrix Transmitter delivers a compelling blend of performance, manageability, and value. Its architecture is optimized for low-latency video and precise input replication, so operators experience near-native control even when the host system is remotely located. In addition, the device is compatible with standard network infrastructure, helping you simplify deployment and reduce total cost of ownership while maintaining the security and reliability essential to enterprise operations.

• Point-to-point extension and KVM switching: Extend a host session across IP networks with tight keyboard/mouse replication and fast, reliable switching between target endpoints.
• DVI-D video with USB 2.0 peripheral support: Digital video via DVI-D and USB 2.0 connectivity for keyboards, mice, flash drives, touch screens, and other HID devices.
• HID emulation for broad device compatibility: Emulates standard HID devices so peripherals work seamlessly with host systems without specialized drivers.
• Single-target sharing and multicast options: Share a single host across multiple operators or multicast a source to several endpoints for synchronized viewing.
• Network-driven, scalable matrix architecture: Leverage your existing IP network to scale KVM access, control, and reach across your organization while maintaining manageable performance and reliability.

Technical Details of Black Box Agility KVM Over IP-Matrix Transmitter - DVI-D, USB 2.0

• Video interface: DVI-D digital video path supports high-quality, crisp digital output for compatible displays.
• Peripheral connectivity: USB 2.0 support enables keyboard, mouse, touch screens, USB drives, and other HID devices to operate with the remote host.
• KVM emulation: Keyboard and mouse emulation plus HID device emulation ensure accurate input/output behavior at remote endpoints.
• Networking and matrix capabilities: IP-based transmitter supports point-to-point extension, single-target sharing, and multicasting for flexible deployment scenarios.
• Distance and scalability: The effective distance is limited only by your network capabilities, allowing long-range KVM deployment across campus or data-center campuses.
• Management and deployment: Designed for integration into standard IP networks, enabling scalable, centralized control of multiple sessions and endpoints.

How to install Black Box Agility KVM Over IP-Matrix Transmitter

1. Plan your network and IP addressing. Assess network topology, ensure appropriate bandwidth for video and USB traffic, and reserve IP addresses for the transmitter and associated receivers. Designate subnets that minimize latency and avoid IP conflicts to maximize KVM performance.

2. Prepare the transmitter and endpoint components. Connect the transmitter to a power source and to the local network using a standard Ethernet connection. Prepare the remote receivers or endpoints by placing them near the target displays and user workstations, ready for connection to DVI-D displays and USB devices.

3. Connect video and HID peripherals. Attach the DVI-D video source to the transmitter input and connect the corresponding DVI-D display at the remote endpoint. Attach USB keyboards, mice, touch screens, and any additional HID devices to the transmitter or the remote endpoint, depending on your exact layout and deployment plan.

4. Establish the IP path and pairing. Use the Agility management interface to configure the IP path between the transmitter and receiver(s). Set up the desired deployment mode (point-to-point, single-target sharing, or multicast) and pair endpoints to enable seamless KVM control across locations.

5. Configure multicast and access controls as needed. If your deployment requires multicast, enable multicast routing within the management interface and assign appropriate group addresses. Define user access rights and session controls to ensure secure, authorized operation across your organization.

6. Verify performance and tune for latency. Power up the receivers, initiate a test session, and verify video quality, input responsiveness, and HID device compatibility. Adjust settings for resolution, latency, and bandwidth if needed to optimize performance for your specific environment.

Frequently asked questions

Q: What is the Black Box Agility KVM Over IP-Matrix Transmitter used for?
A: It enables KVM over IP extension and matrix functionality, allowing users to control a host computer remotely with keyboard and mouse while sharing displays and peripheral devices across a network. It supports point-to-point extension, single-target sharing, and multicast, making it suitable for data centers, control rooms, and distributed work environments.

Q: Which video and USB interfaces does the transmitter support?
A: The transmitter uses a DVI-D video interface for high-quality digital output and USB 2.0 for HID devices such as keyboards, mice, touch screens, and USB drives, ensuring broad compatibility with common peripherals.

Q: How flexible is the deployment?
A: It provides multiple deployment modes, including point-to-point extension for direct connections, single-target sharing for multi-user access to a single host, and multicast for synchronized display of a source to several endpoints. This makes it adaptable to various workloads and facility layouts.

Q: How far can I extend KVM over IP with this transmitter?
A: The extension distance is effectively limited by your network capabilities. With a robust IP network, you can achieve long-range extensions across campus or within data-center ecosystems without the constraints of coaxial or dedicated KVM cabling.

Q: Do HID devices require special drivers?
A: No special drivers are typically required. The transmitter supports keyboard/mouse emulation and HID emulation for common devices, including touch screens and USB storage, enabling plug-and-play operation with host systems.

Q: Is there a management interface for configuration and monitoring?
A: Yes. The Agility platform provides IP-based management for configuring deployment modes, monitoring session performance, and adjusting settings to optimize latency, bandwidth, and reliability across the KVM over IP matrix.