SKU: 54909454976

EBC 3GD Series Sport Slotted Rotors (GD7158)

Sale price$152.24 Regular price$169.16
Save 10%

Pay in installments of $42.29 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 19 - Aug 24

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

EBC 3GD Series Sport Slotted Rotors (GD7158)EBC GD Sports Rotors All rotors including GD Sport Rotors are machined and finished in the UK or in the USA Quality Castings For An Excellent Product Where castings or finished rotors have been bought in to complement the range, the strictest quality controls you can imagine ensuring the safety and quality of the parts we sell. EBC adds value to its products by strictest quality controls and specifications and a 100% run out, metallurgy, and

EBC GD Sports Rotors
All rotors including GD Sport Rotors are machined and finished in the UK or in the USA

Quality Castings For An Excellent Product
Where castings or finished rotors have been bought in to complement the range, the strictest quality controls you can imagine ensuring the safety and quality of the parts we sell. EBC adds value to its products by strictest quality controls and specifications and a 100% run out, metallurgy, and dimensional check, plus all USA sport rotors are slotted in housed at either at the Las Vegas facility of the USA operation or in the UK.

All sport rotors are then balanced and runout inspected before release.

EBC Brakes produces all of its GD series and USR discs with a long lasting corrosion resistant finish. The coating is either the world-famous thermic black which protects the off-brake areas of the rotor from corrosion such as inside the pad swept area and inside the hub.

Thermic Black & Nitrotherm™
The wide aperture slots in the GD Sport Rotors series have been shown to reduce brake temperatures by up to 100 degrees by drawing cooling air beneath the brake pad under load. The super silent Ultimax USR slotted series also run cooler along with the new bi-directional BSD series.

All designs offer benefits such as:

  • Cooler brakes
  • Resistance to cracking is possible through drilled rotors
  • Water mud and debris are expelled from the brake area by the slot pattern which is fully machined to the edge of the rotor for this reason. (Slots that stop short of the rotor edge can cause pocketing of debris and generate a rib on the rotor outer edge.)
  • As the pad and rotor wear the slots maintain a perfectly flat and smooth pad surface and prevent rotor ribbing.
  • On a global scale, most EBC rotors are made from high quality G3000 or G3500 high carbon castings and 100% of these are precision machined , balanced and runout inspected in either the UK or the USA.

Dimple Drilled Rotor
The dimple drilled rotor was invented by EBC back in the 90's and has been imitated by many because of its ability to offer pad degassing without “Through Drilling” disc or rotor holes which has been shown to promote rotor cracks.

The wide aperture slots on the EBC units actually draw cool air under the brake pad and rotor interface and help cool the temperatures of the pad contact which can shoot up to well over 1000 degrees at the very heart of the brake pad during heavy braking and can cause brake fade or loss of brake effect.

There are four choices of sport rotors, premium non slotted OEM style, GD, USR and BSD designs and as wear occurs all can be skimmed and life extended many times using this on-car brake lathe. A perfectly flat smooth and aligned USED rotor can often be better than a new rotor as the casting matrix settles over time. Many OEJM car builders actually skim rotors on the car from NEW to align them to the car and the cut, which only removes a tiny amount does not render the disc/rotor below minimum thickness if done correctly.

All new Gen 3 Rotors are Silver Coated

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 54909454976

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.3 ★★★★★
Based on 13 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
B
Verified Purchase
B. Colonna
Grantham, US
★★★★★ 4
Takes The Edge Off!
This is a decent product. If you are going to do a lot of edging, or want to do deep trenching to run conduit, etc. this is NOT the product you want. It is electric, so you are tethered to an outlet, and of course, the farther you go on extension cords, the less of the 12 amp juice you get. It also trenches to 1 1/2", which is OK, but not enough to dump conduit, etc. That said, this is a very good edger. Out of the box, it is minimal assembly. You connect the three pieces of the shaft, removing some edge tape from it, and inserting two metal bolts and plastic knobs, similar to most lawn mowers these days. Then you install the plastic handle with another bolt. That's it. For use, you have a lever which you pull up for edging and lower for trenching to adjust the group clearance. You also choose 1", 1/4", or 1 1/2" depth. Then you plug it in. There is a white line on top of the blade cover so you know where the blade is. You just pull the trigger to run the blade, or release the trigger to stop the blade. Be careful not to lose sight of your electric cord so you don't hit it! I edged along my driveway, about 50' on each side, as well as my front of my lawn, so another 85' along the lawn and the apron (both sides). That's over 350'. It cut through the grass and dirt easily. It struggled a couple of times, on some tough mounds of grass, but like any other tool, you don't force it when that happens, just back up and do that area again slowly. If you come too close to blacktop, Belgian block, stone, etc. you will see sparks so you will know. Just keep in mind, this is an edger. You will be left with the severed grass/sod to remove. In my case I was loooong overdue for a edging, so I spent a long time scraping the sod off the pavement with a shovel. I expect with more frequent ending, and now working with a cleaner edge, this will be less of an issue. Either way, that is not on the product, but the state of the lawn. The edger has 2 read wheels and one smaller front wheel so , although this is not like a big, gas-powered curb jumping unit, you have the option of attacking a curb edge from either the blade side or other side of the edger, so you can get real close to a Belgian block curb. I also did the edge where my grass meets my mulched flower bed, but that was more of a trimming than a edge removal. Overall, the Work edger did as good, or better, a job than my string trimmer, and I didn't have to stop every few minutes to rewrap string. Plus it trenched enough to give me a definitive edge, whereas the string edger just cuts into the grass, not a real trench.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 28, 2020
L
Verified Purchase
Lynetta Mason
Lowell, US
★★★★★ 5
Easy to use for a clean looking cut!
I do wish there was a cordless version but I'm so glad I bought this. It took some time to edge everything the first time because I had to cut the lines but it's been a breeze ever since. I just walk the perimeter of the yard and driveway and it does it's job with ease. The front wheel has three settings which determines how far down the blade cuts and the blade has two settings for edging or trenching. The handle is stationary but it can be lifted up or down. There's a guideline on top of the blade guard that helps identify where the blade is going to make the cut. TIP: Lean it back on the back wheels before pulling the trigger and slowly bring it down because it will jump if the blade isn't lined up and touches the concrete. It doesn't roll well in the grass but it's very smooth when rolled on the concrete. It's definitely worth having to give a clean and finished look. It's well built and isn't too heavy but definitely has some weight to it. It's only loud when the blade hits the concrete otherwise it sounds like a drone. The only complaint I have is that I have to watch the cord closely other than that it's the perfect tool to give a clean look to the yard.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 5, 2025
M
Verified Purchase
Marc A.
New York, US
★★★★★ 5
Great product for the $$$$
This edger is awesome. Easy to put together. Intuitive. I put it together inside of 10 minutes. Shifted the edger "guide" down, and went to work. This corded electric model is WAYYY cheaper than the battery powered (or gas powered) models, and is absolutely up to the task. Lightweight and maneuverable. Quiet. Easy to store. The motor got a little "bound" when I tried to edge too fast, but the manual had clearly warned me on this - to back up, let the blade get back up to speed, and then edge again. The lawn edges are now straight, well-defined, and immaculate.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 2, 2026
J
Verified Purchase
JW
Louisville, US
★★★★★ 5
Great edger
This was a gift for someone very picky about their yard. They loved it and said it works great.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 9, 2026
P
Verified Purchase
PrimeUser7887
Draper, US
★★★★★ 3
Great but could be Epic
If you’re looking for a solid edger for sidewalks and driveways, this is a great tool. It’s powerful, well-built, easy to assemble, and simple to use. For edging, I would definitely recommend it. However, I wouldn’t recommend it as a true trencher. I bought it for both purposes but mainly needed it for trenching. The maximum cutting depth is only about 1.5 inches, which isn’t deep enough for most garden borders or running cable. In my opinion, a real trencher should be able to reach at least 3 inches deep. The limitation comes down to the blade size and guard design. WORX could improve this model with a larger blade guard and additional wheel depth settings. If they released a version capable of 3–3.25 inch trenching depth, it would really stand out in the market. Overall, it’s an excellent edger, just not a true trencher.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 25, 2026

recommand products