Pay in installments of $235.62 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 12 - Aug 17
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Appsys ProAudio FLX-DANTE Flexiverter 64 x 64 Channel Format Converter for Dante Audio NetworkingA Flexiverter is an ultra compact box with a main format, dual power supply and a slot for a switchable AUX board, which adds the conversion format to the FLX unit. At the moment 5 FLX units and 10 AUX boards are available. Format combinations provide the most common conversions with improved features and unique pairings(e. g. AES50 <> Dante, Dante <> Dante SRC, Dante <> AVB). The Flexlink ConnectionThe FlexLink connection is designed to connect two
A Flexiverter is an ultra-compact box with a main format, dual power supply and a slot for a switchable AUX board, which adds the conversion format to the FLX unit. At the moment 5 FLX units and 10 AUX boards are available.
Format combinations provide the most common conversions with improved features and unique pairings
(e. g. AES50 <> Dante, Dante <> Dante SRC, Dante <> AVB).
The Flexlink Connection
The FlexLink connection is designed to connect two Flexiverters, or one Flexiverter with the Multiverter. It provides:
- 192x192 channels bi-directional transmission of 24-bit uncompressed audio (fully transparent to AES3 compatible metadata bits)
- Super-low link latency of 4 samples
- Dedicated, high-quality reference clock signal with automatic configuration
- Power supply for connected devices (to reduce cabling), alternatively serves as redundancy scheme when both devices are powered: in case
of power failure, both devices keep working from the remaining power supply.
- Uses standard HDMI cables (with locking screws), to provide easy field replacement in case of defects.
The Flexiverter FLX-DANTE is the main format 64 x 64 channel EAS/EBU converter that converts between the built-in interface and the AUX card or splits Dante to the Aux Card.
Features:
- 3 Possible Flexiverter Applications - Stand Alone, Dual Mode and Multiverter Extension
- Status LEDs For Each Port
- DIP Switches for Advanced Configuration
- USB for Firmware Updates
- AUX Port for Optional Format Module
Specifications:
- Stand Alone (Converts between built-in AES67 interface and the AUX card)
- Channels (all can be used at the same time): 64×64 Dante @ 48kHz 32×32 Dante @ 96kHz, 16×16 Dante @ 192kHz or maximum capacity of the AUX
card, whichever is less - Redundant Power Supply: up to 2x
- Battery-powered Operation (DC 12-15V): Yes
- Sample Rate Conversion: No
- Signal Splitting: Yes (to AUX or FlexLink)
- Channel-wise Routing: No
- Remote Control: No
Dual Flexiverter (Devices are connected via FlexLink cable) - Channels (all can be used at the same time): 64×64 Dante @ 48kHz32x32 Dante @ 96kHz, 16×16 Dante @ 192kHz plus what the AUX card provides
- Redundant Power Supply: up to 3x
- Battery-powered Operation (DC 12-15V): Yes
- Sample Rate Conversion: No
- Signal Splitting: Yes (to AUX or FlexLink)
- Channel-wise Routing: No
- Remote Control: No
Flexiverter + Multiverter (Flexiverter connected to multiverter via FlexLink cable) - Channels (all can be used at the same time): 448×448 from multiverter plus 64×64 Dante plus what the AUX card provides
- Redundant Power Supply: up to 3x
- Battery-Powered Operation (DC 12-15V): Yes
- Sample Rate Conversion: Yes (with SRC-64 card in Multiverter)
- Signal Splitting: Yes, to everything
- Channel-wise Routing: Yes, via MVR-64 (web, telnet or serial terminal)
- Remote Control: Yes, via MVR-64 (web, telnet or serial terminal)
General - Dimensions: 152x44x153mm (WxHxD) excluding connectors/buttons, 152x44x169mm (WxHxD) including device-side connectors/buttons
- Weight: 560g
- Power Consumption: +15V DC, 9W max (18W to power two devices via FlexLink)Triple-redundant input (2x DC, 1x via FlexLink)
- Cable Length: FlexLink 1m / 3ft. max. recommended
- Sample Rates: 32 / 44.1 / 48 / 64 / 88.2 / 96 / 128 / 176.4 / 192 kHz
- Channel Count: 64×64 @ 48kHz, 32×32 @ 96kHz, 16×16 @ 192kHz plus additional AUX channels depending on AUX card
Item Includes:
- 1x FLX-DANTE Flexiverter Device
- 1x AC Power Cord (country specific)
- 1x User Manual
Warranty:
- 2 Year Manufacturer's Warranty
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy