Adaptive Technologies Group BC12-17 Beam Clamp - 12"-17"

Adaptive Technologies Group BC12-17 Beam Clamp - 12"-17"Adaptives low profile channel style beam clamps anchor permanently to structural I Beams and provide a safe, predictable method for suspending loads from overhead. The channel style beam clamp is adjustable for beam flange widths ranging from between 12 and 17 (305 432mm). The body of the clamp mounts flush underneath thebeams flange and is equipped with a loadrated swiveling shoulder eye bolt thatrotates in the direction of the load to minimize side

Adaptive’s low-profile channel style beam clamps anchor permanently to structural I-Beams and provide a safe, predictable method for suspending loads from overhead. 

The channel style beam clamp is adjustable for beam flange widths ranging from between 12” and 17” (305-432mm). The body of the clamp mounts flush underneath thebeam’s flange and is equipped with a loadrated swiveling shoulder eye bolt thatrotates in the direction of the load to minimize side loading. 

Specify this beam clamp for many types of suspensions from horizontally oriented I-Beams, including wire rope assemblies, bridles, rigging chain and other equipment. 

A variety of spacers are included in the kits to accommodate beam flange thickness from .1875 to 1.0” (5mm to 25mm) and the only tools that are needed to install the clamp is a 1.0” and a 7/16” hex wrench.

Features

• Single load-rated center suspension 
  
• Provides safe load-rated hang point to 45° off center. 
  
• Secures to beam flanges ranging from 12” - 17”

Specifications

• Materials: All Steel Components
  
• Width: (BC12-17) 12” to 17” / 305mm to 432mm
  
• Finish: Powder Coat
  
• Color: Black
  
• WLL: 980 lb / 445 kg WLL (VERTICAL) on Steel I-Beams 
  
• WLL: 45 DEG. WL: 578 lb / 261 kg Steel I-Beams 
  
• WLL: 300 lb / 136 kg max on wooden beams
  
• Design Factor: 5:1
  
• DO NOT EXCEED 45° off hang points 
  
• Weight: 10.6 lb / 4.8 kg