Tripp Lite by Eaton 1 x 2 HDMI over Cat5/6 Extender Kit, Box-Style Transmitter/Receiver for Video/Audio, Up to 150 ft. (45 m), TAA

The Tripp Lite by Eaton 1 x 2 HDMI over Cat5/6 Extender Kit is a robust, performance-oriented solution designed to simplify the distribution of high-definition audio and video across longer distances. Built for commercial and AV installations, this kit includes a box-style transmitter and a matching receiver, delivering a clean, reliable pathway for HDMI signals over standard Cat5e/6 copper cabling. Whether you’re outfitting a classroom, conference room, retail environment, or home theater with a multi-display setup, this extender kit gives you the flexibility to position sources and displays where they’re most convenient while maintaining pristine video quality and synchronized audio. The system is designed to support two displays from a single source, enabling consistent, frame-accurate playback across angles and viewing environments, all without the complexity of proprietary cabling or expensive fiber runs. In addition to its performance advantages, the kit is built to withstand daily use, featuring compact, rack-friendly enclosures that are easy to mount behind displays, in equipment closets, or within a multimedia cabinet. With its simple plug-and-play operation and broad compatibility, you’ll enjoy a scalable HDMI distribution solution that’s ready for today’s HD content and tomorrow’s evolving AV needs.

• Extends HDMI signals up to 150 ft (45 meters) over standard Cat5e/6 copper cabling, preserving full HD video quality and multi-channel audio with minimal latency for smooth, cinematic playback across multiple displays.
• 1 x 2 HDMI distribution capability: a single HDMI source can be delivered to two displays simultaneously, enabling synchronized presentations, mirrored video walls, or dual-screen monitoring in classrooms, boardrooms, or retail environments.
• Box-style transmitter and receiver enclosures provide rugged, space-saving hardware that can be mounted in tight spaces, behind displays, or within a cabinet, delivering a clean installation that blends with other AV gear.
• Supports high-definition content including up to 1080p at 60 Hz, 3D video, and multi-channel digital audio with HDCP compliance, ensuring secure, compatible playback from modern sources to today’s displays.
• Plug-and-play installation with user-friendly setup, built to endure commercial use and frequent deployments; includes TAA compliance for procurement flexibility in government and corporate environments.

Technical Details of Tripp Lite by Eaton 1 x 2 HDMI over Cat5/6 Extender Kit

• Maximum video resolution: up to 1080p at 60 Hz for crisp, true HD images on both displays.
• Transmission distance: up to 150 ft (45 m) between transmitter and receivers when using Cat5e/6 cabling.
• Cable type: compliant with standard Cat5e/6 UTP cables, enabling cost-effective, widely available networking wires for AV distribution.
• Video and audio support: HDMI with support for uncompressed audio formats and 3D content; HDCP-compliant for protected content streaming.
• Inputs/outputs: 1 HDMI input on the transmitter; 2 HDMI outputs (one for each connected display) via the remote receivers; RJ45 connectors for Cat5e/6 links.
• Power: external power adapters required for transmitter and each receiver unit to ensure consistent signal integrity and reliable operation across distance.
• Enclosure and build: compact, box-style housings designed for easy mounting in AV racks or on walls behind displays; rugged construction suitable for daily use.
• Compliance: TAA (Trade Agreements Act) compliant for government procurement and compatible with a wide range of commercial deployment scenarios.
• EDID and authentication: EDID pass-through with automatic source/display negotiation to maintain compatibility across different displays and content sources.
• Installation footprint: a streamlined kit that minimizes cable clutter and simplifies routing in educational and corporate environments.

how to install Tripp Lite by Eaton 1 x 2 HDMI over Cat5/6 Extender Kit

• Begin by connecting your HDMI source (such as a Blu-ray player, gaming console, or computer) to the transmitter’s HDMI input using a standard HDMI cable; verify the source is powered on and set to the correct output format.
• Run two Cat5e/6 cables from the transmitter to each of the remote receivers; ensure the cables are properly seated in the RJ45 ports and avoid sharp bends that could degrade signal quality.
• Connect each receiver to its respective display using an HDMI cable; position the displays as needed for your installation, keeping cables tidy and out of the way of movement or heat sources.
• Apply power to the transmitter and each receiver using the included (or specified) 5V DC adapters; verify all power indicators are lit and the units boot up normally.
• Power on the source and displays, then test playback to confirm video and audio are synchronized across both displays; if necessary, adjust EDID settings or display resolutions to optimize performance.

Frequently asked questions

• Q: How far can I extend HDMI with this kit? A: The extender supports distances up to 150 ft (45 meters) when using Cat5e/6 cables; actual performance can vary based on cable quality and environment.
• Q: Can I connect two displays to the same HDMI source at the same time? A: Yes. The kit is designed for 1 x 2 distribution, delivering the same source to two displays with synchronized video and audio.
• Q: Does this extender support 4K content? A: The current specification indicates support up to 1080p at 60 Hz; it is not rated for 4K playback. Check with product documentation for any updates or firmware options.
• Q: Is HDCP supported? A: Yes, the extender kit is HDCP-compliant, ensuring secure content protection when used with compliant sources and displays.
• Q: Are EDID settings adjustable? A: The system provides EDID pass-through with automatic negotiation to help maintain compatibility between your source and displays; manual adjustments may be available depending on firmware.
• Q: Do I need external power for the transmitter and receivers? A: Yes. External 5V DC power adapters are typically required for reliable operation across the extended distance and to power all active components.
• Q: Is this solution suitable for education or corporate environments? A: Absolutely. The kit is designed for commercial-grade AV distribution, with rugged enclosures, easy setup, and TAA compliance for procurement in government and enterprise contexts.