VSM (Vertical Surface Mount) for MM1, SM1, SM2 & SM3 Mounts

VSM (Vertical Surface Mount) for MM1, SM1, SM2 & SM3 Mounts***SHIPS WORLDWIDE*** The SatGear VSM (Vertical Surface Mount) attachment was designed to allow the SatGear MM1, SM1, SM2 and SM3 mounts to be mounted to vertical surfaces. Such as such as vehicle side panels, RV walls, trailers, semi trucks, offroad vehicles, vans, service vehicles, equipment enclosures, shipping containers, and other upright surfaces where horizontal mounting is not practical. Built for versatility and strength, this attachment

***SHIPS WORLDWIDE***

The SatGear VSM (Vertical Surface Mount) attachment was designed to allow the SatGear MM1, SM1, SM2 and SM3 mounts to be mounted to vertical surfaces. Such as such as vehicle side panels, RV walls, trailers, semi trucks, offroad vehicles, vans, service vehicles, equipment enclosures, shipping containers, and other upright surfaces where horizontal mounting is not practical.

Built for versatility and strength, this attachment works seamlessly with SatGear MM-Series and SM-Series mounts, including the MM1, SM1, SM2, and SM3. It provides a stable and secure mounting interface while maintaining the same rugged reliability and flexibility SATGEAR mounts are known for.

This Vertical Surface Mount Attachment offers three secure installation methods, allowing you to choose the best solution for your application:

Suction Cup Mounting:

Attach using two large 6-inch heavy-duty suction cups for an extremely strong hold on smooth surfaces. Customers can choose between manual pump suction cups or electronic suction cups directly on the product page. Both options provide exceptional holding strength, with the larger 6-inch diameter offering significantly more surface contact and grip compared to smaller suction cups. This option is ideal for temporary installations, vehicle mounting, and situations where drilling is not desired.

Magnetic Mounting:

Mount using two, 3.5" ultra-strong magnets, each rated at over 130 pounds of pull force. With more than 260 pounds of total holding strength, this option provides an incredibly secure attachment to steel surfaces such as vehicle bodies, equipment panels, and metal enclosures. This allows for fast installation, easy repositioning, and reliable performance even in demanding environments.

Hard Mount Installation:

For permanent installations, the attachment includes integrated mounting brackets with pre-drilled holes, allowing you to securely fasten the mount directly to any vertical surface using screws or bolts. This method provides maximum long-term stability and is ideal for trailers, service bodies, equipment enclosures, walls, and fixed installations.

Constructed from precision-cut aluminum and finished with a durable powder coat, this attachment is built to withstand vibration, weather, and demanding real-world conditions while keeping your Starlink Mini securely positioned.

Perfect for existing SatGear mount owners who want the flexibility to mount their Starlink Mini on vertical surfaces without replacing their current mount system.

Compatibility: 

Compatible with SatGear MM1, SM1, SM2, and SM3 Starlink Mini mounts. Works with manual suction cups, electronic suction cups, magnets, or permanent hard-mount installation Designed specifically for the Starlink Mini when used with SatGear mount systems

Electronic Suction Cup Option (Automatic Self-Pumping Technology):

For maximum convenience and reliability, customers can select the optional electronic suction cups, which automatically maintain optimal suction without manual intervention. These intelligent suction cups continuously monitor vacuum pressure and will automatically re-pump themselves whenever suction drops below approximately 80%, ensuring consistent holding strength at all times.

This eliminates the need for manual re-pumping, routine checking, or monitoring suction levels, making them ideal for long-term installations, vehicle mounting, and mission-critical applications where reliability is essential.

The electronic suction cups are powered by a built-in rechargeable battery and can be easily recharged using a standard USB cable. On a full charge, they can operate for approximately 2 to 3 weeks while actively maintaining suction. They are also water-resistant and designed to withstand rain, snow, and harsh outdoor conditions, though they are not intended for full submersion.

Adjustable Angle for Optimal Satellite Alignment:

Features a built-in angle adjustability, allowing you to fine-tune the tilt of your Starlink Mini by approximately ±5 degrees. This allows you to compensate for vehicle panels or surfaces that are not perfectly vertical, ensuring your Starlink dish can be positioned at the optimal angle for the best possible satellite connection.

This adjustability is especially valuable for vehicle side panels, trailers, service bodies, and equipment enclosures, where surface angles can vary. By allowing precise alignment, the mount helps maximize signal reliability and performance while maintaining a secure and stable installation. 

Key Features:

Converts Your Existing Mount for Vertical Installation: Allows your SatGear MM1, SM1, SM2, or SM3 mount to be securely installed on vertical surfaces such as vehicle side panels, walls, trailers, equipment enclosures, etc.

Three Secure Mounting Methods: Supports heavy-duty 6-inch suction cups (manual or electronic), ultra-strong magnets, or permanent hard-mount installation using integrated pre-drilled brackets, giving you complete installation flexibility.

Large 6-Inch Heavy-Duty Suction Cup Compatibility: Designed to work with oversized 6-inch suction cups for maximum surface contact and holding strength. Available with manual pump suction cups or electronic suction cups for effortless installation and reliable performance.

Optional Electronic Suction Cups with Automatic Self-Pumping: Available electronic suction cups automatically maintain suction by re-pumping whenever vacuum pressure drops below 80%, eliminating the need for manual pumping or monitoring. Rechargeable via standard USB and capable of operating for 2 to 3 weeks per charge, they are water-resistant and designed for reliable performance in rain, snow, and outdoor environments.

Ultra-Strong Magnetic Mounting Option: Include optional 2 quantity, 3.5" high-strength magnets rated at over 130 pounds of pull force each, providing over 260 pounds of total holding strength for secure mounting on steel vehicle panels and equipment.

Permanent Hard-Mount Capability: Integrated mounting brackets with pre-drilled holes allow for direct screw or bolt installation, making it ideal for permanent setups on trailers, service bodies, walls, and equipment enclosures.

Adjustable Tilt for Optimal Starlink Performance: Features approximately ±5 degrees of angle adjustability, allowing you to fine-tune the dish orientation to compensate for non-vertical surfaces and achieve the best possible satellite connection and signal reliability.

Full Compatibility with SatGear Mount Systems:  Works seamlessly with SatGear MM1, SM1, SM2 and SM3 Starlink Mini mounts, allowing existing customers to expand their mounting options without replacing their current system.

Precision Aluminum Construction: Manufactured from high-grade aluminum and finished with a durable powder coat, providing excellent strength, corrosion resistance, and long-term durability in demanding environments.

Built for Mobile and Fixed Applications: Ideal for RVs, semi trucks, off-road vehicles, fleet vehicles, trailers, heavy equipment, and permanent infrastructure installations.

Fast Installation and Reconfiguration: Allows quick conversion of your existing mount for vertical use, making it perfect for temporary setups, mobile operations, or permanent installations.

Note: Starlink Satellite Internet System Sold Separately

United States, Canada and Mexico orders ship via UPS