Hudski Dualist MTB

Hudski Dualist MTBThe Dualist is a jack of all trades. With flip chip axles front and rear, boost spacing and UDH compatibility, it can be set up to suit your local terrain and riding style, or even whatever parts you have laying around. A rigid mountain bike, an all terrain bike, flat bar gravel or a trusty commuter, there is something in it for everyone. The Dualist is just as comfortable on a pump track as it is exploring new dirt roads. The Dualist is up to

The Dualist is a jack of all trades. With flip chip axles front and rear, boost spacing and UDH compatibility, it can be set up to suit your local terrain and riding style, or even whatever parts you have laying around. A rigid mountain bike, an all terrain bike, flat-bar gravel or a trusty commuter, there is something in it for everyone. The Dualist is just as comfortable on a pump track as it is exploring new dirt roads. The Dualist is up to whatever task you throw at it. Become enabled.

Geometry & Ride Feel

When you’re riding the Dualist, it feels like a modern cross-country/trail bike—stable, confident, and fun. The stack, reach, bar width, and seat tube angle are designed to mimic a mountain bike’s riding position. The head tube angle and fork offset provide similar MTB steering and handling characteristics, though the bike feels lighter and more responsive due to the carbon fork and lighter tires.

You can adjust the chainstay length for your preferred ride feel:
• Short position: more poppy and playful
• Long position: more planted and stable

The fork offset can also be switched between 44 mm and 54 mm:
• 54 mm: quicker, more agile steering
• 44 mm: slower, more self-centering feel

Experiment with these settings to match your riding style—the out-of-the-box configuration is an excellent starting point.

Clears up to 29 x 2.4" or 27.5 x 3.0" tyres.

Materials & Composition

The frame is made from butted 6061 aluminum tubes. The bottom bracket shell is forged in two pieces, and welded down the middle, this allows for internal cable routing through the bottom bracket and chainstays. The fork is made from a combination of unidirectional and 3k weave carbon fiber and has a carbon steerer.

Intended Use

Both the frame and fork are tested to ASTM 3 standards. Our bikes are designed for rough trails, rough unpaved roads, and rough terrain and unimproved trails that require technical skills. Jumps and drops are intended to be less than 61cm (24").

Care & Maintenance

Keep your Dualist clean by rinsing off mud and dirt after rides, then dry all components thoroughly to prevent rust. Check the drivetrain regularly—keep the chain clean and lubricated, and inspect the gears for wear. Make sure the tires are properly inflated and free of cuts or punctures. Routinely check bolts and axles for proper torque, inspect the brakes, and ensure the wheels are true.

With simple, routine maintenance, your Hudski Dualist will perform smoothly and last for years to come.

Components

Brake lever: Shimano SLX M71000
Brake caliper: Shimano SLX M71000
Rotors: Shimano Deore M6100 SM-RT64, 180mm front/160mm rear
Derailleur: Shimano SLX SGS M7100, 12-speed
Shifter: Shimano Deore M6100, 12-speed, i-spec EV
Cassette: Shimano SLX M7100 10-51
Chain: Shimano SLX M7100
Crankset: RaceFace Ride, 32t alloy chainring. 165mm S/M, 170mm L/XL
Bottom Bracket: RaceFace
Rims: Hudski Panoramic, 27i, welded, tubeless ready, ETRTO 622x27 (700c/29")
Hubs: Shimano HB-TC500-15-B, Shimano FH-TC500-MS-B
Spokes: Sapim 2.0-1.8-2.0
Nipples: Brass 14g
Tyres: Maxxis Rekon 29 x 2.4"
Axle Dimensions: Front 15x148, Rear 12x182mm
Handlebar: Hudski Longhorn 16
Grips: PNW Loam
Dropper seatpost: PNW Range
Dropper lever: PNW Range, silicone pad, i-spec EV
Saddle: WTB Deva Pro-Gel
Inner tubes: Maxxis 29x1.75/2.4"
Stem: Hudski Shortie 50mm S/M, 60mm L/XL
Headset: Hudski sealed cartridge bearing