Zvizzer Heavy Cut HC 4000

Zvizzer Heavy Cut HC 4000ZviZZer HC 4000 Heavy Cut is a coarse grained, modern sanding polish specially developed for the rapid processing of heavily weathered paints. Thanks to the high proportion of very homogeneous abrasive grain, this polish achieves a fast and effective grinding performance as well as a high degree of gloss. It reliably removes scratches and sanding marks from grain size P2000. The polish is free of solvents and silicones and is made on a pure water

ZviZZer HC 4000 Heavy Cut is a coarse-grained, modern sanding polish specially developed for the rapid processing of heavily weathered paints. Thanks to the high proportion of very homogeneous abrasive grain, this polish achieves a fast and effective grinding performance as well as a high degree of gloss. It reliably removes scratches and sanding marks from grain size P2000.

The polish is free of solvents and silicones and is made on a pure water basis. ZviZZer HC 4000 Heavy Cut is suitable for all types of paint - including scratch-resistant, fresh and hardened varnishes. It prepares the surface optimally for subsequent treatment with the MC 3000 Medium Cut sanding polish. The best results are achieved in combination with hard polishing sponges, which have strong cutting properties.

Product qualities

• Container size: 250 ml & 750 ml

• Removes grinding from grain size P2000

• High proportion of the finest grinding grains

• Silicone-free formula without fillers

• Fast and effective removal

Instructions for use

At low speed (approx. 1,000 rpm) evenly on the missing point. Then the speed to approx. 1,800 rpm and polish the defect with light pressure.