SKU: 70357497466

ImmersionRC Ghost Atto Duo – The Ultimate Racer’s Receiver

$45.89 $50.99
Save 10%
No.2 Bestseller on salfueradeti.es >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 9 - Jul 14

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

ImmersionRC Ghost Atto Duo – The Ultimate Racer’s ReceiverWhy Race with Anything Else? For racers on the bleeding edge, every little helps. Miss a single control packet at 160km h (even at 222Hz) and a racing drone moves > 40cm (> 15 inches) without control. The Atto Duo is a high end receiver for drone racing which combines two independent receiver channels, and twin antennas, to dramatically reduce lost packets during racing. Check out all our Receivers and the rest of our ImmersionRC Ghost Products!

Why Race with Anything Else?

For racers on the bleeding edge, every little helps. Miss a single control packet at 160km/h (even at 222Hz) and a racing drone moves > 40cm (> 15 inches) without control.

The Atto Duo is a high-end receiver for drone racing which combines two independent receiver channels, and twin antennas, to dramatically reduce lost packets during racing.

Check out all our Receivers and the rest of our ImmersionRC Ghost Products!

Nothing comes even close.

  •  2.4GHz ISM Band
  •  Tiny 15 x 12mm, and 0.61g
  •  Two fully independent Ghost receivers
  •  Crazy Race Performance, 222.22Hz updates (500Hz Ready)
  •  ~4ms End to End Latency (2ms ready), with OpenTx Integration
  •  Fully supported by Betaflight with GHST driver

Package Includes:

  • 1x Atto Duo Receiver
  • 2x qTee Antenna
  • Silicone Cables
  • Heat Shrink

A Growing Family

The Atto was the first member of the Ghost Receiver family. Small enough for most applications, and best-in-class performance.

The tiny Zepto, 10mm x 10mm, and weighing in at 0.31g, is ideal for micro-class quads, including Cine-Whoops where every gram matters. Same mounting hole pattern for installation on any of the Proton Pack boards.

The new Atto Duo is the same size and weight as the Atto.

Proton Pack Compatible

By far the cleanest way to mount the essential Video Transmitter, and Ghost Receiver, on a 30×30, 20×20, or Whoop/Toothpick frame.

Single-sided PCB, with low-profile mounting of transmitter and receiver, which doubles as heat-sink for the video transmitter.





Why Full Diversity?

When racing, the control link, connecting the pilot’s brain to the drone, is absolutely critical.

Standard receivers, using single antennas, or dual-antenna setups using ‘Antenna Diversity’ drop performance when antennas are blocked by frames or batteries, or when the nulls in the antenna radiation pattern cause signal loss.

True diversity receivers use two completely independent receiver chains to greatly improve performance. Every control packet gets two chances to be received correctly.

Long Range FPV, and UAV Benefits

For long range FPV, and UAV use, where slow movement of an aircraft can result in significant time spent in antenna nulls, the Atto Duo is exactly what is required.

Link Margins are significantly improved with a full diversity link, and with improved link margin comes extended range, or increased security at shorter range.

SPECIFICATIONS & SUPPORT FILES

Essential Specs, User Manuals, Firmware & Downloads:

ÁTTO DUO Rx SPECIFICATIONS

  • Receivers: Twin, Independent, Full Diversity
  • Frame Rate: 250Hz Standard, 500Hz Ready
  • Downlink RF Power: +13dBm
  • Sensitivity: -117dBm in Long Range mode
  • Serial Formats: SBus, SBus-Fast (200k) , SRXL-2 (400k), GHST, SBus Inverted  1 2 3
  • Firmware: Over-the-air (OTA) upgradable
  • Power Supply: 5V recommended, as low as 3.6V tolerated, no more than 5.5V
  • vTx Control: Tramp control from ‘T’ pin on Rx, regardless of selected serial format
  • Antenna Connectors: Standard U.FL (vs. Zepto which uses the much smaller MHF4)
  • Dimensions: 14.8mm x 11.5mm, 0.6g (w/o antenna)
  • Rx Noise Floor Analysis: Auto on power-up, or on demand from the Tx
1 GHST protocol available both OpenTx 2.3.10 (without control sync), and in a custom IRC build with sync.
2 GHST protocol supported in Betaflight 4.3 development builds.
3 Sbus is inverted by definition, SBus Inverted flips it over so that it doesn’t require inverters on F4 FCs
4 Some specifications vary depending upon the regionally-specific product SKU
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 70357497466

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.5 ★★★★★
Based on 56 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
D
Verified Purchase
Denise
Phoenix, US
★★★★★ 5
Sublimation tape that works.
Number of Items: 2
Very strong and sticky tape. Great to use for sublimation on tumblers. No residual left on tumblers. Holds amazing. Stretch is just enough to help you get things nice and tight.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 15, 2026
T
Verified Purchase
Tara
Alexandria, US
★★★★★ 5
Good Lg rolls for tape dispenser
Number of Items: 2
Very reliable & fits on the heat tape dispenser which is a relief!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 13, 2026
V
Verified Purchase
VKS
Alexandria, US
★★★★★ 5
Fits in a standard tape dispenser
Number of Items: 12
First of all, I like the width of this tape when I don't need the full width of standard 20mm. It's great for delicate projects and minimizing taping over two-sided sublimations like keychains. There's just enough adhesion and it comes off cleanly so it does the job. If you don't need the full width of 20mm, this is a great value. For those looking for a compatible dispenser, these rolls fit into a standard weighted Scotch tape base like the C-38. There will be room around the core because these rolls have a larger diameter, and room on either side because the rolls are thinner than standard Scotch tape, but once you pull the tape onto the blade, the roll remains taut and it's easy to remove pieces of your desired length with one hand.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 28, 2026
J
Verified Purchase
Josephine Brevetti
Bozeman, US
★★★★★ 5
Keeps product in place
Number of Items: 6
Love this product. Keeps my iron on sheets in place and never stick to the product and never leaves a residue in product either.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 28, 2026
T
Verified Purchase
🪷Tammy🪷
Massapequa, US
★★★★★ 5
really good value
Number of Items: 6
The heat resistant tape is very sticky and durable. It doesn’t leave a residue on the product that i am using it on. There is no smell. Good value and quality
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 22, 2026

recommand products

ALOR Natural Diamond Bracelet in Stainless Steel Cable Brown
223.75
ReMARKable Designs Men's Color Gemstone Ring with 1 Princess Blue Lab Created Sapphire in Stainless Steel Black - Grey
53.99
LAGOS Caviar Lux Collection Natural Diamond Bracelet in Sterling Silver and 18 Karat White Yellow with 0.07ctw Round Diamond
495.00
ReMARKable Designs Color Gemstone Ring in Sterling Silver White with 1 Round White Topaz 0.65ctw, Size 7
179.00
ReMARKable Designs Natural Diamond Bracelet in 14 Karat Yellow Gold with 3.52ctw Round Diamonds
2398.50