Apollo 1/2 in. x 300 ft. Red PEX-A Expansion Pipe1 2 in. x 300 ft. Red PEX A Expansion Pipe Flexible, durable PEX A tubing for potable water systems. Designed for cold expansion connections, it delivers full flow performance with excellent corrosion resistance and fewer potential leak points. Key Features: PEX A Flexibility: Bends easily to reduce fittings and leak points in runs. Full Flow Design: Maintains high water output with 0. 625 in. OD and 0. 475 in. ID. Hot Cold Ready: Rated up to 200F and

1/2 in. x 300 ft. Red PEX-A Expansion Pipe

Flexible, durable PEX-A tubing for potable water systems. Designed for cold expansion connections, it delivers full-flow performance with excellent corrosion resistance and fewer potential leak points.

---

Key Features:

• PEX-A Flexibility: Bends easily to reduce fittings and leak points in runs.
• Full-Flow Design: Maintains high water output with 0.625 in. OD and 0.475 in. ID.
• Hot/Cold Ready: Rated up to 200°F and 160 psi; suitable for potable water.
• Versatile Connections: Works with ASTM F1960 expansion and compatible crimp/clamp methods.
• Durable Construction: Cross-linked polyethylene resists corrosion, cracking, and kinking (heat-repairable).

Please check the Product Data Sheet Here

---

Specifications Table:

Specification	Details
Application	Potable Water
Color Family	Red
Color/Finish	Opaque with red print line
Connectivity	Barb; compatible with expansion and crimp/clamp/sleeve methods
Material	Cross-Linked Polyethylene (PEX)
Maximum Flow Rate (gallons per minute)	2.3
Maximum Working Temperature (F)	200
Maximum Working Pressure (psi)	160
Minimum Working Temperature (F)	32
PEX Type	A
Pack Size	1
Pipe Features	Corrosion Resistant, Ductile, Flexible, Heat-repairable if kinked
Pipe or Fitting Product Type	Pipe & Tubing
Product Weight (lb.)	16.1
Actual Inside Diameter (in.)	0.475
Actual Outside Diameter (in.)	0.625
Nominal Inside Pipe Diameter (in.)	1/2
Pipe Wall Thickness (in.)	0.075
Product Length (ft.)	300
Certifications and Listings	ASTM Compliant, NSF Listed, cNSFus-pw, CSA B137.9
Standards Met	ASTM F876, F877, F1807, F1960, F2023, F2080, F2159
Pressure/Temperature Ratings	160 psi @ 73.4°F; 100 psi @ 180°F; 80 psi @ 200°F
Compatibility	Compatible with Tectite by Apollo push-to-connect fittings; Uponor and Wirsbo systems
Manufacturer Warranty	25 Years: For exclusive use with ASTM F1960 fittings
Installation Environments	Concrete, gypsum-based lightweight concrete, sand, asphalt, in/under wood flooring, behind wallboard or plaster

---

Frequently Asked Questions (FAQ):

Q: What fittings work with this pipe?
A: Use ASTM F1960 expansion fittings; it is also compatible with crimp, clamp, or sleeve methods and Tectite push-to-connect fittings.

---

Q: Is it safe for potable water?
A: Yes. It is NSF listed and compliant with ASTM standards for potable water applications.

---

Q: What are the pressure and temperature ratings?
A: 160 psi at 73.4°F, 100 psi at 180°F, and 80 psi at 200°F.

---

Q: Can it be installed in slabs or behind walls?
A: Yes. It may be installed in concrete, lightweight gypsum concrete, sand, asphalt, under wood flooring, or behind wallboard/plaster.

---

Q: Does the red color mean the pipe itself is red?
A: The tubing is opaque with a red print line for easy identification of hot-water lines.

---

Streamlined Utility with a Clean, Modern Edge

This PEX-A tubing brings a refined, unobtrusive presence to service spaces, clearing visual clutter with long, elegant runs and minimal fittings. The subtle opaque finish and crisp red print line feel precise and purposeful. Run it in continuous sweeps to keep mechanical rooms tidy and architectural, then conceal it confidently knowing it performs beautifully. It’s the quiet backbone of a polished, well-appointed home.

---

Upgrade your plumbing runs with flexible, full-flow PEX-A that installs faster and performs for decades—add it to your project today.

Warranty

Installation