Pay in installments of $82.50 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 17 - Jul 22
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
TAG | Heavy Duty Towbar | Isuzu D-MAX TF TFR TFS 2012–2020 | T7H720TAG Heavy Duty Towbar Solution for your Isuzu D MAX TF TFR TFS The TAG Heavy Duty Towbar (T7H720) is a robust Class 4 towing solution specifically engineered for the Isuzu D MAX (06 2012 07 2020) equipped with a factory rear bumper step. Designed and manufactured in Australia, this towbar features an innovative 3 piece design that simplifies installation while providing maximum strength. With an impressive 3500kg towing capacity and a 350kg maximum
TAG Heavy Duty Towbar Solution for your Isuzu D-MAX TF TFR TFS
The TAG Heavy Duty Towbar (T7H720) is a robust Class 4 towing solution specifically engineered for the Isuzu D-MAX (06/2012 - 07/2020) equipped with a factory rear bumper step. Designed and manufactured in Australia, this towbar features an innovative 3-piece design that simplifies installation while providing maximum strength. With an impressive 3500kg towing capacity and a 350kg maximum ball weight, it is the ultimate choice for heavy-duty hauling of large caravans, horse floats, or work trailers. The 50mm square hitch receiver is finished with a durable powder coating for long-lasting protection. Every TAG towbar is backed by a Limited Lifetime Warranty, ensuring reliability for the life of your vehicle.
Key Features:
- Heavy Duty Class 4 Towbar - 50mm Square Hitch Receiver
- 3500kg Towing Capacity / 350kg Ball Weight
- Suits models equipped with rear bumper step
- Innovative 3-Piece Design for easier installation
- Durable Powder Coated Finish
- TAG Limited Lifetime Warranty
- Includes: Tow Ball, Tow Ball Mount, Pin & Clip, and D-Shackles
- Design: Concealed exposure for a clean, professional finish
- Installation: Bumper removal required; No bumper cut out required
Please Note: A towbar is a safety critical item and not always a straightforward fitment due to vehicle manufacturing variation. We strongly recommend you get your towbar and wiring harness installed by a professional towbar or vehicle accessory fitting workshop.
Specifications:
- Towbar Class: Heavy Duty (3-Piece Design)
- Towbar Capacity [kg]: 3500
- Static Load Capacity (Ball Weight) [kg]: 350
- Hitch Type: 50mm Square Hitch Receiver
- Coating: Powder Coated
- Bumper Removed During Fitment: Yes
- Bumper Cut Out Required: No
- Exposure: Concealed
- Towbar Fitting Time [min.]: 60
Important Information
- The image shown may not reflect the actual product
- Shipping times may vary depending on destination and stock availability
Full Vehicle Applications List
| Make | Model | From | To | Body | Series | Engine | Variant | Drivetrain |
|---|---|---|---|---|---|---|---|---|
| ISUZU | D-MAX | 02/2017 | 06/2020 | Cab Chassis | TF | 4JJ1-TCX | 3.0L | Diesel | CRDi | AWD |
| ISUZU | D-MAX | 02/2017 | 06/2020 | Cab Chassis | TF | 4JJ1-TCX | 3.0L | Diesel | CRDi | RWD |
| ISUZU | D-MAX | 02/2017 | 06/2020 | Ute | TF | 4JJ1-TCX | 3.0L | Diesel | CRDi | AWD |
| ISUZU | D-MAX | 02/2017 | 06/2020 | Ute | TF | 4JJ1-TCX | 3.0L | Diesel | CRDi | RWD |
| ISUZU | D-MAX | 11/2015 | 06/2020 | Ute | TFR | 4JJ1-TCX | 3.0L | Diesel | SX SPACE CAB | Automatic/Manual RWD |
| ISUZU | D-MAX | 06/2012 | 05/2020 | Cab Chassis | TFR, TFS | 4JJ1-TC | 3.0L | Diesel | CRDi | AWD |
| ISUZU | D-MAX | 06/2012 | 05/2020 | Cab Chassis | TFR, TFS (TFR85J) | 4JJ1-TC | 3.0L | Diesel | CRDi | RWD |
| ISUZU | D-MAX | 06/2012 | 05/2020 | Cab Chassis | TFR, TFS | 4JJ1-TC | 3.0L | Diesel | CRDi | RWD |
| ISUZU | D-MAX | 06/2012 | 05/2020 | Ute | TFR, TFS (TFS85J) | 4JJ1-TC | 3.0L | Diesel | CRDi | AWD |
| ISUZU | D-MAX | 06/2012 | 06/2020 | Ute | TFS | 4JJ1-TCX | 3.0L | Diesel | EX, SX | Automatic/Manual 4WD |
| ISUZU | D-MAX | 06/2012 | 06/2020 | Ute | TFR | 4JJ1-TCX | 3.0L | Diesel | LS HI-RIDE, SX, LS-U etc. | Automatic/Manual RWD |
| ISUZU | D-MAX | 06/2012 | 06/2020 | Ute | TFS | 4JJ1-TCX | 3.0L | Diesel | LS-M, LS-U, SX, X-RIDER etc. | Automatic/Manual 4WD |
| ISUZU | D-MAX | 06/2012 | 06/2020 | Ute | TFS | 4JJ1-TCX | 3.0L | Diesel | LS-U, SX SPACE CAB | Automatic/Manual 4WD |
| ISUZU | D-MAX | 06/2012 | 06/2020 | Ute | TFR | 4JJ1-TCX | 3.0L | Diesel | SX, SX HI-RIDE, SX LOW-RIDE | Automatic/Manual RWD |
| ISUZU | D-MAX | 11/2015 | 12/2018 | Ute | TF | RZ4E-TC | 1.9L | Diesel | 4WD | |
| ISUZU | D-MAX | 11/2015 | 12/2018 | Ute | TF | RZ4E-TC | 1.9L | Diesel | 4WD | |
| ISUZU | D-MAX | 11/2015 | 12/2018 | Ute | TF | RZ4E-TC | 1.9L | Diesel | RWD | |
| ISUZU | D-MAX | 11/2015 | 12/2018 | Ute | TF | RZ4E-TC | 1.9L | Diesel | RWD | |
| ISUZU | D-MAX | 06/2012 | 12/2018 | Ute | TF | 4JK1-TC | 2.5L | Diesel | 4WD | |
| ISUZU | D-MAX | 06/2012 | 12/2018 | Ute | TF | 4JK1-TC | 2.5L | Diesel | 4WD | |
| ISUZU | D-MAX | 06/2012 | 12/2018 | Ute | TF | 4JK1-TC | 2.5L | Diesel | RWD | |
| ISUZU | D-MAX | 06/2012 | 12/2018 | Ute | TF | 4JK1-TC | 2.5L | Diesel | RWD | |
| ISUZU | D-MAX | 06/2012 | 01/2017 | Ute | TF | 4JK1-TC | 2.5L | Diesel | D | AWD |
| ISUZU | D-MAX | 06/2012 | 01/2017 | Ute | TF | 4JK1-TC | 2.5L | Diesel | D | RWD |
| ISUZU | D-MAX | 06/2012 | 12/2016 | Ute | TF | 4JK1-TC | 2.5L | Diesel | Automatic/Manual 4WD | |
| ISUZU | D-MAX | 06/2012 | 12/2016 | Ute | TF | 4JK1-TC | 2.5L | Diesel | Automatic/Manual RWD |
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.0 ★★★★★
Based on 19 reviews
Sort
Product Reviews
★★★★★ 5
Easily supports a pair of 26" displays
Size: Dual, Style: Free-Standing
I have no complaints with this stand. It is not as nice as the Inland brand sold at MicroCenter, but it does its job. It beats the price of the MicroCenter one, thats for sure.
It comes with all the hardware you might need, even long screws and bushings if you have a display that needs them.
Assembly was quick. It comes mostly assembled anyway. You have to put the bottom on the post then attach the assembled arms to the post.
Setting up can be a challenge but with help, its easy. After mounting the bracket on the back of the displays, you just slide them into the receiver on the arms.
Once mounted, adjusting the position is simple, but can take a while as there are several joints which can be positioned to angle the displays as you like.
The cord clips do an OK job of cord management, but the clips are not as good as the Inland ones. They do the job, but not as durable. I broke the one that goes on the post, but I tried getting it to hold a wad of wire. My fault.
I recommend this stand.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 3, 2025
★★★★★ 5
It's simple, it works, & its price makes for a good deal
Size: Single, Style: Free-Standing
I needed a stand for a 27" VIZIO TV that had been wall-mounted for a few years, & (?) the original stand must've got the toss long ago... It's hard to say...
I found this stand on Amazon priced right, plus it had a coupon attached to the listing. I scrolled down & I saw a "newer model" of the same product was available, so I was initially hesitant.
But, looking at the product pictures, reading the description, & scanning through some of the reviews, then the same with the "newer model" — the only difference I could see was mostly aesthetic (it also appears to have a desk mount included, which wouldn't have worked for me regardless of its purpose—either for conversion to a desk stand-off mount, or to further secure the stand....?)
Eventually, I just thought "....it's a stand with a VESA mount; how do you **** that up...?" And I really couldn't think of anything...even if the VESA bracket was milled not to spec (it is milled to spec), I could
have still made it work....(?) So, I made the purchase, received it, & 9-10 screws later, the TV had a stand. & I'm guessing a much more versatile stand than the original. The bracket that attaches the stand to the VESA mount can lower or raise the TV quite a bit. Even in it's highest position, it's still retains its sturdiness & remains stable. The baseplate has a decent amount of weight, and its overall design is well balanced to favor stability (to a tolerance; e.g., an old CRT monitor just isn't going to work).
The stand is literally 4 basic pieces—the VESA bracket, an articulating bracket, a metal tube, & a metal baseplate. If you have a standard phillips screwdriver, then the stand is easy to assemble. If you have any experience with TV mounts, or TV stands, then it assembles in less than 15 minutes.
Given what you get for the price, the ease of assembly, the added versatility, if you need a stand for a screen within the manufacturer's specific tolerances, then I would absolutely recommend this stand.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 19, 2021
★★★★★ 5
Decent Monitor Stand with Some Assembly Required
Size: Single, Style: Free-Standing
This monitor stand works pretty well and is a good value for the price. It’s sturdy and adjustable, which makes it perfect for a variety of monitors, including my 32-inch curved Samsung. The assembly is straightforward if you have a Phillips screwdriver and something to tighten bolts, like a wrench. It’s solid once it’s put together and holds my monitor securely. The phone holder could use some improvement. It doesn't adjust to face me directly, which is a bit annoying. The stand itself is great for saving desk space and providing better ergonomics, but it can be a bit of a hassle to assemble if you’re not handy with tools. Overall, a good buy if you need a reliable monitor stand.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 25, 2024
★★★★★ 3
Works, Good product, but wouldn't recommend for specifically 3 27inch screens.
Size: Triple, Style: Free-Standing
I purchased this stand to have 3 27inch 2560x1440 monitors, with the side ones angled towards me in a typical 3-monitor setup often seen being used by racing or aviation simulator guys. This stand's arms for the two side monitors are not long enough to have said monitors angled more than 5 to 8 degrees meaning they are forced to be completely linear which is incredibly awkward to try to use because you can barely see or use the screen space on the far edges.
𝐖𝐢𝐭𝐡 𝐭𝐡𝐞𝐬𝐞 𝐬𝐢𝐳𝐞 𝐬𝐜𝐫𝐞𝐞𝐧𝐬, 𝐭𝐡𝐞 𝐨𝐧𝐥𝐲 𝐰𝐚𝐲 𝐭𝐨 𝐡𝐚𝐯𝐞 𝐞𝐯𝐞𝐧 𝐨𝐧𝐞 𝐚𝐭 𝐚𝐧 𝐚𝐝𝐞𝐪𝐮𝐚𝐭𝐞 𝐚𝐧𝐠𝐥𝐞 𝐟𝐨𝐫𝐜𝐞𝐬 𝐭𝐡𝐞 𝐨𝐭𝐡𝐞𝐫 𝐦𝐨𝐧𝐢𝐭𝐨𝐫 𝐭𝐨 𝐛𝐞 𝐢𝐧 𝐩𝐨𝐫𝐭𝐫𝐚𝐢𝐭 𝐦𝐨𝐝𝐞, 𝐤𝐢𝐧𝐝 𝐨𝐟 𝐦𝐞𝐬𝐬𝐢𝐧𝐠 𝐮𝐩 𝐭𝐡𝐞 𝐰𝐡𝐨𝐥𝐞 𝐩𝐨𝐢𝐧𝐭 𝐨𝐟 𝐛𝐮𝐲𝐢𝐧𝐠 𝐭𝐡𝐢𝐬. The product description should not say it can hold 3 27 inch screens because the amount of struggling I had to do to get it to be acceptable was ridiculous.
The stand is... not heavy enough to safely hold monitors of this size either, and additional weight was required ( 2 10lb dumbbells in my case ) configuring the height of your monitors with this stand can be dangerous as well as they could fall down the central post so you have to be extremely careful, but, it is pretty easy other than that.
It is a great option if you don't have a desk with an edge for typical stands ( I don't. ) You can place the stand anywhere, and you don't have to drill through your desk if you really don't want to. The cable clips are a very nice included bonus, and they sent me a replacement without any hassle when I totally effed up my first attempt at setup.
But, I would have shopped harder and got something else if I knew all this prior all the same. Maybe even bought a gigantic curved screen instead.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 8, 2025
★★★★★ 5
Everyone likes the extra outlets and spacing!
Size: 6ft, Color: Yellow
I have a livestream desk shared by a team where we have lots of equipment. We were always running out of outlets and the team had nothing but praise when I installed this 16 outlet replacement. The spacing is perfect for a variety of bricks, plugs and adapters of all sizes. It's metal construction seems very durable and it's easily to mount it solidly to the wall with the wings at each end. The power cord is sufficiently beefy and lighted switch at one end a plus. Overall, we're very happy with its design, capability and value. The extra praise for doing a simple replacement was nice too!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 21, 2025