Pay in installments of $149.50 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 29 - Sep 3
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Pacemaker King Brown | Single 3" Cat Back Exhaust Without Rear Muffler | Nissan Patrol Y62 5.6L V8 2013–Current | KB9520-CBPacemaker King Brown Single 3" Cat Back Exhaust Kit Without Rear Muffler Nissan Patrol Y62 5. 6L V8 2013 to Current Upgrade your Nissan Patrol Y62 with the Pacemaker King Brown single 3" cat back exhaust system without rear muffler. This system is designed for Nissan Patrol Y62 5. 6L petrol V8 models from 2013 to current and is suited to drivers wanting a more pronounced V8 exhaust note than a rear muffler configuration. Built for Australian 4x4 use,
Pacemaker King Brown Single 3" Cat Back Exhaust Kit Without Rear Muffler - Nissan Patrol Y62 5.6L V8 2013 to Current
Upgrade your Nissan Patrol Y62 with the Pacemaker King Brown single 3" cat-back exhaust system without rear muffler. This system is designed for Nissan Patrol Y62 5.6L petrol V8 models from 2013 to current and is suited to drivers wanting a more pronounced V8 exhaust note than a rear-muffler configuration. Built for Australian 4x4 use, it is suitable for touring, towing, off-road driving, and everyday performance applications. Note: Suits Nissan Patrol Y62 5.6L petrol V8 models from 2013 to current. This version is supplied without the rear muffler. Confirm fitment and sound preference before ordering.
Features:
This Pacemaker King Brown exhaust system is designed as a vehicle-specific 4x4 exhaust upgrade for the Nissan Patrol Y62 5.6L V8.
- Single 3" Cat-Back System: Large 3 inch exhaust layout designed to improve exhaust flow over the factory-style system while maintaining a practical setup for 4x4 use.
- Without Rear Muffler Configuration: Supplied without the rear muffler for drivers wanting a more pronounced exhaust note compared with a muffled rear-section setup.
- Designed for Y62 Patrol V8: Suits Nissan Patrol Y62 5.6L petrol V8 models from 2013 to current where the factory exhaust layout matches this kit.
- 4x4 Exhaust Design: Part of the Pacemaker King Brown 4x4 exhaust range, developed for demanding Australian touring, towing, and off-road conditions.
- Vehicle-Specific Fitment: Designed for the listed Nissan Patrol Y62 application. Professional installation is recommended for correct alignment and clearance.
- Deeper V8 Sound: The no rear muffler layout generally produces a deeper and louder V8 exhaust note than a system fitted with a rear muffler.
- Australian Made Brand: Pacemaker exhaust products are manufactured in Australia.
Product Specifications
| Feature | Value | Feature | Value |
|---|---|---|---|
| Brand | Pacemaker King Brown | Part # / SKU | Confirm before ordering |
| Product Type | Cat-Back Exhaust Kit | System Configuration | Single 3" Without Rear Muffler |
| Pipe Size | 3" / 76mm | Rear Muffler | Not Included |
| Vehicle Fitment | Nissan Patrol Y62 | Year Range | 2013 to Current |
| Engine Compatibility | 5.6L Petrol V8 | Body Type | Wagon / SUV |
| Fitment Type | Vehicle-Specific Fitment | Application | 4x4, Touring, Towing, Off-Road |
| Material | Confirm before ordering | Recommended Installation | Professional Installation Recommended |
Important Notes:
- Suits Nissan Patrol Y62 5.6L petrol V8 models from 2013 to current.
- This is the single 3" cat-back exhaust kit without rear muffler.
- The no rear muffler configuration may produce a louder exhaust note than a system fitted with a rear muffler.
- Confirm your vehicle series, engine, body type, exhaust layout, and sound preference before ordering.
- Professional installation is recommended to ensure correct alignment, clearance, and secure mounting.
Important Information
- The image shown may not reflect the actual product
- Shipping times may vary depending on destination and stock availability
Vehicle Applications:
Vehicle Applications
| Make | Model | From | To | Body | Series | Engine | Variant | Drivetrain |
|---|---|---|---|---|---|---|---|---|
| NISSAN | ||||||||
| Nissan | Patrol | 2013 | Current | Wagon / SUV | Y62 | 5.6L Petrol V8 | Confirm fitment before ordering | Confirm before ordering |
Warranty Information
| Product | Warranty Period |
|---|---|
| Pacemaker Headers | Two (2) years. |
| Pacemaker King Brown 4x4 Exhaust systems | Five (5) years. |
| Pacemaker Sports exhaust systems | Five (5) years. |
| Fabrication products and accessories | One (1) year. |
Payment & Security:
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.2 ★★★★★
Based on 6 reviews
Sort
Product Reviews
★★★★★ 4
Reasonably adequate room divider
Size: 4 Panel-88'', Color: Beige
I'm reviewing this as I assemble it.
Couple things:
1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky.
One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection.
Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it.
2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless.
3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together.
4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place.
5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options.
NOW on to the utility itself.
1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great!
2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world.
3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it.
All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2023
★★★★★ 5
Sturdy, Easy to Set Up, and Looks Great
Color: Grey, Size: 34" - 3 Panel
I’m really happy with this RANTILA 3-panel room divider. It was simple to set up, stands securely on its own, and gives plenty of privacy. The height is perfect, and the panels look clean and modern in my space. It’s lightweight enough to move around but still feels sturdy. Overall, a great divider that works exactly as I needed.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 14, 2025
★★★★★ 5
Not 6 ft
Color: Grey, Size: 34" - 3 Panel
I bought this for filming my auditions. I am 5’4” .The height lists is 6 ft but the fabric only reaches 5’9 1/2 “!
when I must film myself head to toe, the top bars are showing. It’s easy to set up. But when I film I must tilt my camera to keep the top bars out of frame which is not acceptable.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 1, 2026
★★★★★ 4
Perfect for what I needed - getting a 2nd one.
Color: Black, Size: 22" - 4 Panel
Putting it together was a BEE-OTCH!! Yes, one of the tubes had the top cap installed at the wrong end (& getting it off required tools), and yes, stretching the fabric to get the screws in was incredibly hard...but am I buying another one? YES! After all is said and done, this is a great room divider. I opted out of installing the paddle feet & it still works perfect. It won't filter light all that great and even though it stands on its own, it can be blown over easily - but for the price? Excellent. If I wanted a heavy duty, thicker, more expensive one, I would've bought one.
The 2nd one is on the way.
Perfect height, no weird smell, nice and light and easy to move around.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 30, 2025
★★★★★ 5
WHERE HAVE YOU BEEN 😊
Color: Grey, Size: 34" - 3 Panel
I purchased RANTILA 3 Panel Room Divider, 6 Ft Tall Folding Privacy Screen Freestanding Room Partition Wall Dividers, 102''W x 20''D x 71''H, Grey. For outdoor use on my patio is perfect . PRIVACY!!! YAY!
It was packaged very carefully. There were no missing parts. Instructions were there but I still had to use the video visually. A few screws would not screw in. So I used a hammer with a few good taps that helped using the screw driver. 😊 It was easy putting it together following the directions. Everything is well made. Love the height, functionality and it’s definitely light it works.
Thank you
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 7, 2025