Spray.Bike Paint Can (Framebuilders Collection 400ml) -

Spray.Bike Paint Can (Framebuilders Collection 400ml) -Instructions for use Ensure surface is clean and dry Wear protective gloves, protective clothing, eye face protection Always paint in an open space in the open air Shake can for at least 3 minutes before use Test spray for 2 3 seconds prior to application Optimal temperature for spraying: 20 25C. Do not use Spray. Bike if the temperature is below 10C or above 35C, or if relative humidity is above 75% Always spray with the can in a vertical position,

Instructions for use

• Ensure surface is clean and dry
• Wear protective gloves, protective clothing, eye/face protection
• Always paint in an open space in the open air
• Shake can for at least 3 minutes before use
• Test spray for 2-3 seconds prior to application
• Optimal temperature for spraying: 20-25°C. Do not use Spray.Bike if the temperature is below 10°C or above 35°C, or if relative humidity is above 75%
• Always spray with the can in a vertical position, otherwise the paint might 'spit' unevenly
• Solid colours: spray surface from a distance of 5-12 cm
• Pocket Clears, Frame Builder’s Smoothing Putty, Frame Builder’s Transparent Finish, Frame Builder’s Cold-Zinc, Frame Builder’s Metal Primer, Frame Builder’s Carbon Primer, Frame Builder’s Metal Plating: spray surface from a distance of at least 20 cm
• Keirin Flake: spray surface from a distance of at least 30 cm
• Frame Builder’s Top Wax: Spray onto a paper towel or soft lint-free cloth and apply gently
• When spraying, keep hand moving at all times
• Allow to dry before adding 2nd coat (touch dry: 10 minutes, complete cure: 2 hours)
• At end, turn can upside down and spray for 2 seconds before storing
• Protect can from sunlight and temperatures exceeding 50°C/122°F
• For a satin or gloss top-coat, finish with Spray.Bike Frame Builder's Transparent Finish - Satin/Gloss. For a matte top-coat, finish with the Frame Builder's Transparent Finish - Matte
• For ongoing protection (whether the finish is matte, satin or gloss), regularly apply the Frame Builder's Top Wax