Pay in installments of $14.32 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 17 - Jul 22
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Birmingham Aged Bronze Keyed Entry Door LeverThe Schlage Birmingham Aged Bronze Keyed Entry Door Lever is perfect for use on exterior doors where extra security is needed. The ornately styled Birmingham lever spares no attention to detail, providing a touch of refinement everywhere it goes. Our Aged Bronze finish is inspired by traditional design, featuring warm, copper tones that break through its darker, aged exterior. The lever unlocks when the door is opened from the inside, allowing you to
The Schlage Birmingham Aged Bronze Keyed Entry Door Lever is perfect for use on exterior doors where extra security is needed. The ornately styled Birmingham lever spares no attention to detail, providing a touch of refinement everywhere it goes. Our Aged Bronze finish is inspired by traditional design, featuring warm, copper tones that break through its darker, aged exterior. The lever unlocks when the door is opened from the inside, allowing you to leave quickly and conveniently and re-enter easily. Plus, it was designed and tested with strength and durability in mind.- Use with 1-3/8 in. to 1-3/4 in. door
- Works with right and left swing doors
- Guaranteed to fit on existing, standard pre-drilled doors
- Lever design pairs well with traditional styles like claw-foot bathtubs and Victorian plumbing fixtures
- Finish pairs well with natural tones and handmade items
- Schlage has offered durable door hardware in a range of unique style combinations to express any personality
- Use a key from the outside or manually rotate the interior turn button to lock and unlock
- Lock and finish backed by limited lifetime warranty
- Easy installation with Phillips screwdriver
- Self-aligning screw holes make installation easy and hassle-free
- Universal latches slide easily into place and require no tools or manual adjustments
- Meets ANSI Grade 1 (Best) standards for strength and security
Features
| Item Weight | 2.0 |
| Security/ANSI Grade | ANSI Grade 1 (Best) |
| Hardware Finish Family | Bronze |
| Lock Type | Keyed |
| Commercial/Residential | Residential |
| Total Number of Keys Included | 2 |
| Wired or Wireless | No electrical connectivity |
| Strike | Round corner |
| Included | Drilling Template,Hardware,Installation Instructions,Self Guiding Screws |
| Number of Pins | 5 |
| Door Handing | Universal |
| Finish | Aged Bronze |
| Features | Adjustable Backset,Easy Installation,Rekeyable |
| Application Type | Entry |
| Keyway | C |
| Lock Type2 | Keyed Entry |
| Backset size (in.) | Adjustable |
| Combo Pac | Non-Combo |
| Minimum door thickness (in.) | 1.4 |
| Door Lock Style | Antique |
| Returnable | 180-Day |
| Material | Other |
| Door Locks & Knobs Product Type | Keyed Levers |
| Lever style | Straight |
| Interior/Exterior | Interior/Exterior |
| Product Weight (lb.) | 2.0 |
| Lever material | Other |
| Electronic/Mechanical | Mechanical |
| Lever grip length (in.) | 4 |
| Cross bore diameter (in.) | 2.125 |
| Throw length (in.) | 1 |
| Maximum door thickness (in.) | 1.8 |
| Strike width (in.) | 1.6 |
| Strike height (in.) | 2.3 |
| Assembled Width (in.) | 5.15 in |
| Projection (in.) | 3 |
| Bore hole diameter (in.) | 1 |
| Assembled Height (in.) | 2.75 in |
| Housing height (in.) | 2.8 |
| Assembled Depth (in.) | 2.72 in |
| Housing Width (in.) | 4.8 |
| Manufacturer Warranty | Lifetime limited mechanical and finish warranty |
| Certifications and Listings | No Certifications or Listings |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.2 ★★★★★
Based on 6 reviews
Sort
Product Reviews
★★★★★ 5
Works great, do the double drain for best results
My 06 Altima (185k miles) had been burning massive amounts of oil (like 4 quarts every 800 miles) due to a leaking PCV valve hose that took forever for me to narrow down (months). So after getting that under control I figured I needed to decontaminate the poor engine.
When using this I idled my car to operating temp (about 8 minutes). Poured the bottle in, idled it for another 15 minutes. Drained the oil (black and thick). Put the plug back in, poured about 2.5qts of new oil in. Idled it for 10 minutes. Drained that (black but much thinner). Took the old filter off. Let both areas drain for 10 minutes. Put the plug back in, put the new filter on and filled with the 4.6qts of new oil my car calls for. Ran for a few minutes (like 2 with a few revs) and then let sit for 10 mins before checking the level.
When I checked my dipstick it was so clean I thought I had a leak because I couldn't see it on any of the crosshatch. I ended up having to go by touch to get the reading. This stuff is amazing.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 15, 2025
★★★★★ 5
Worked for me! Definitely recommend!
Used a whole can in my 2009 Civic 1.8L with 150k miles. I can honestly say, this helped remove a lot of sludge out of the engine. The oil came out with a water-like texture and super dark! Before taking out the oil filter, I added new lower cost oil to the engine and let the engine run for about 5 minutes to get that extra flush! You can definitely see all the extra sludge in the new oil!
Drained and refilled with new oil and filter. The engine definitely sounded quieter and smoother than before!
If you value your car, I would definitely recommend doing this flush on your higher mileage cars every 50k miles or so!
Definitely recommend this LiquiMoly product!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 11, 2025
★★★★★ 5
3rd Update! See review... Good stuff and works as advertised...
Update - 3rd oil change/flush. Engine oil draining from engine is waaaay cleaner than my first flush. Probably won't need to do a 4th time for several changes. I added Ceratec at this change and am amazed how much better the engine performs since my initial flush. Less clatter and very smooth idle. (Jeep 4.0 I6)
Update- 2nd change and used the flush again. About 7000 miles from first use. The oil was cleaner and less "gunky" as first time but oil was definitely dirtier than normal. Right away noticed off idle throttle response improved. Then on a drive I take regularly with a mountain pass and long downhill I noticed that even tho the jeep downshifted out of OD it took much less throttle to hold 65 up a long grade. On the downhill normally I would see 50-60 mpg max on the digital readout. This time. It went to 99 which to me indicates more vaccum below the throttle plate. My guess is the rings freed up a bit more than the first flush and highway mileage is up to 23+ where I would get 21 before. Nice!
Used in 2001 Jeep Grand Cherokee. 140k miles and a ticking lifter (common in the 4.0 - 6 cylinder...). Definitely cleaned sludge (oil filter very heavy!) and oil was dark when draining. Idles smoother, oil stays cleaner longer, slight oil pressure increase and runs cooler. The lifter still ticks but probably a cam lobe issue. Will use it after 7500 miles or 1 year. Will report back after next change.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 22, 2017
★★★★★ 5
Tips and tricks
I watched several videos by professionals who used this. Follow instructions. Make sure the engine is warm before you put it in. Make sure you have everything you need. The biggest tip I got that was repeatedly emphasized by the pros was to buy a “cheap” oil in addition to the new oil. After you run the flush drain the oil and flush. Put the cheap oil in and “rinse” the inside of the engine with the cheap oil. Then drain again. Replace the oil and filter with your good stuff.
I followed these instructions or suggestions and….
I sat in the truck while the flush was running. It’s a 13 year old truck with 150,000 miles. It was running strong but burning oil and kind of loud. Sounded like it was growling. There were some ticking type noises that made me nervous. As I sat in the truck and let the flush cycle through the engine at idle I could literally hear the flush working. Very slowly it was like someone gave the engine a Xanax and you could hear it getting quieter and calming down.
I drained, rinsed with cheap oil only letting the cheap oil run through at idle for another 15 minutes then drained again. The oil flush was clearly important. It didn’t come out as black as the first drain but it looked like old nasty oil.
The truck is no longer burning oil. My gas mileage has increased significantly and it is running so quiet and smooth it’s unbelievable. I used a little less of the liquid Molly flush than it called for regarding the flush to oil ratio. I didn’t want to do something too intense to the inside of the engine. But the results were remarkable. Just as advertised after following the instructions. I also added the liquid Molly oil additive to the final oil change to ‘lube’ the inside of the engine. I plan to do another flush in about 10,000 miles.
All that to say, yes, you won’t be disappointed as long as you follow instructions and a few tips and tricks. My truck is almost running like a brand new truck and again it’s an old and tired truck. I will use this as part of a high mileage maintenance and perform the flush every 50,000 miles or so. I feel confident it will extend the life of my engine based on the results
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 9, 2024
★★★★★ 4
Seems to have helped
Bought a used 2020 Jeep Sahara 2 liter turbo charged with 80k miles from a dealership. Dealership had just changed oil the day of purchase. Drove it home 30 miles down interstate and another 20 back roads, it ticked and tapped allot at idle and the dip stick was varnished.
I added the flush, let it idle for 10 minutes and drained it. The new oil from the dealership drained out jet black, no light could pass thru it.
I changed the oil with Walmart oil and a cheap oil filter and let it idle for 5 minutes to clean out all the engine flush, it drained out clean and clear.
I refilled it with Pennzoil Platinum High Mileage oil and a Fram Ultra Synthetic oil filter. It's been a week and the engine is noticeably quieter and smoother since using this product.
If nothing else it cleaned allot of carbon from inside of my engine.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 25, 2025
recommand products
CSF 03-07 Mitsubishi Lancer EVO 7/8/9 1/2 Size Radiator - Black
189.50
Kansei K11S Tandem 19x10.5in / 5x114.3 BP / 12mm Offset / 73.1mm Bore - Hyper Silver Wheel
229.50
Bilstein 03-08 BMW Z4 (E85) B6 Performance Monotube Shock - Rear
144.99
Eibach Pro-UTV 17-20 Polaris RZR XP 4 1000 4-Seat Stage 2 Performance Spring System
493.00
Brembo 18-21 Alfa Romeo Giulia/ Alfa Romeo Stelvio Rear Low-Met Brake Pad
48.52