SKU: 19318386628

Milwaukee 2360-20 M18 ROVER Dual Power Flood Light – 3000 Lumens LED, Cordless/Corded

Sale price$114.21 Regular price$126.90
Save 10%

Pay in installments of $31.73 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 4 - Aug 9

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Milwaukee 2360-20 M18 ROVER Dual Power Flood Light – 3000 Lumens LED, Cordless/CordedM18 ROVER 3000 Lumen Dual Power Flood Light Portable jobsite flood light delivering up to 3,000 lumens of TRUEVIEW LED output. Runs on M18 batteries or AC power, with a rotating head and durable roll cage design for rugged use. Key Features: Dual Power Versatility: Operates with M18 batteries or via AC cord for continuous lighting High Output TRUEVIEW LEDs: Up to 3,000 lumens with 3 modes (High Medium Low) for optimal brightness and runtime Extended

M18 ROVER 3000-Lumen Dual Power Flood Light

Portable jobsite flood light delivering up to 3,000 lumens of TRUEVIEW LED output. Runs on M18 batteries or AC power, with a rotating head and durable roll-cage design for rugged use.


Key Features:

  • Dual Power Versatility: Operates with M18 batteries or via AC cord for continuous lighting
  • High Output TRUEVIEW LEDs: Up to 3,000 lumens with 3 modes (High/Medium/Low) for optimal brightness and runtime
  • Extended Runtime: Up to 9 hours with M18 REDLITHIUM XC 5.0 battery
  • Rugged Construction: Impact-resistant lens/bezel with protective roll cage for jobsite durability
  • Directional Lighting: 240° rotating light head and integrated keyhole for overhead hanging

Specifications Table:

Specification Details
Model 2360-20
Battery System M18
Power Source Cordless or Corded (Hybrid)
Light Output Modes High / Medium / Low
Lumens 3000 / 1500 / 650
Run Time (M18 REDLITHIUM XC5.0) 2 hr / 4 hr / 9 hr
Voltage 18V
Warranty 5 Year Tool, LED Limited Lifetime Warranty
Light Head Rotation 240°
LED Technology TRUEVIEW High Definition Output
Included One 2360-20 M18 ROVER Flood Light (tool-only)

Frequently Asked Questions (FAQ):

Q: Does this include a battery or charger?
A: No. This is the 2360-20 tool-only flood light; batteries and charger are sold separately.


Q: Can it run from wall power?
A: Yes. It features an AC port for corded operation in addition to M18 battery power.


Q: How bright is the light?
A: It delivers 3,000 lumens on High, 1,500 on Medium, and 650 on Low.


Q: What is the typical runtime?
A: With an M18 REDLITHIUM XC 5.0 pack: approximately 2 hours (High), 4 hours (Medium), and 9 hours (Low).


Q: Is there a warranty?
A: 5-year tool warranty with limited lifetime warranty on the LEDs.


Bold, Functional Illumination for Workspaces

This flood light anchors the room with confident, purposeful glow—clean geometry framed by a tough roll cage. The TRUEVIEW LEDs deliver crisp, neutral light that elevates visibility and color accuracy. Style it as a sculptural utility piece in a workshop or garage, pivoting the head to wash surfaces with balanced illumination. It’s a modern essential that blends power and polish for elevated, hardworking spaces.


AI Review Summary:

Across retailer reviews, customers consistently praise brightness and coverage, with many noting the 3,000-lumen output rivals or exceeds halogen work lights while staying cool. Durability and the protective roll cage are frequently mentioned positives, as is the ability to use either M18 batteries or AC power. Common neutral/negative notes include the tool-only nature (extra cost for batteries/charger) and weight/bulk for carrying up ladders. A few mention wishing for finer angle adjustments or integrated cord storage. Representative quotes: “Lights up an entire room—battery or plug-in is a game changer.” “Tough housing, survives jobsite abuse.” “Great light but plan on buying a battery if you don’t already have M18.”


Light up every job with dependable 3,000-lumen performance—add the M18 ROVER Flood Light to your toolkit today.

Warranty

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 19318386628

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.9 ★★★★★
Based on 15 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
E
Verified Purchase
Ezra
Cuba, US
★★★★★ 3
Gets the job done. Just barely.
Style: Dual Arms, Size: 17"-33"
It holds up my monitor, but just barely, and without any confidence or finesse. I had to move on from my previous arm mounts, the HUANUO. Those claimed to hold up to a 30 inch monitor and support 20 pounds. When I upgraded to a Samsung Odyssey Neo G8, it could no longer perform its duties. The gas shock was up to task, but the final adjustment piece that tilts it up or down was a hard down. Queue this piece of hardware! 22 pounds is more than 20, and 32 is more than 30. This time I'm not even technically out of spec. The clamping force seems more than adequate to hold this to my desk. I will, at this point, basically walk you through how I feel about this mount, based on the order of installation instructions. The way it goes together means that you will have to pull your desk out to maneuver the clamp in place before snugging it back up to the wall, a point in the HUANO's favor since it had a clever leveraging mechanism that lets you hang it with your desk still against the wall. The way cords route through the arms close to the base means that you have to route them before you put the swivel arm on the base. This is because it has a screw at the front and back to secure the cover, and the angle/height are such that you cannot fit a screwdriver into the bottom one after you mount it. While not impossible to do with it installed, it would involve a right-angle screwdriver. They provide one of those, but the screwdriver bit of it is on the long shaft, and you would need it on the short shaft to get to that screw. The way the swivel arms mount on the base is less than ideal as well. The arm slips onto a robust metal hub, and you tighten a screw that pushes against a plastic tab that makes it harder or easier to move. The location for this screw faces the wall. So you must turn the arm at an extreme angle to make it tighter or looser. Not a big deal, but noticeable. Top arms go on smoothly, cable routing is simple and easy. No complaints about this section. Mounting the monitor. The instructions are to mount the plate to the monitor, and then slide the plate onto the holder and secure it with the screw. I did this for neither of my monitors, although I tried it for my second. My big monitor went smoothly by mounting the bracket ahead of time and just forcing the arm down into position while my monitor rested on my desk. I tried this for my second bracket, but it was much harder to do with the monitor in a vertical orientation. So then I tried to do it the way the instructions wanted. I would have been able to do so, but my monitor has the mounting location set into the back of the monitor. This means that you can't mount it flush and then slide it on because you don't have clearance. So I tried to use the spacers. The spacers aren't spacious enough and the screws bottomed before snugging. While I'm not saying that solution wouldn't have technically worked, I instead reverted back to mounting the bracket first. This time I laid my monitor flat on the desk, reduced the tension in the shock greatly, and placed it into position that way. At the end when it's complete and setup? It works. It will hold the G8. But just barely. The G8 uses an adapter to go from the monitor mounting points to VESA 100. This adapter sticks out quite a bit from the monitor, which means the weight is further away from the mounting point. Getting the tilt adjustment to hold involved a bigger allen wrench and cranking it further than it seems like it was meant to go. It groaned, but it held. It wants to dip if you mess with it, so I crank it again. Will it one day totally fail on me and point my monitor at my desk? Maybe. But it works on day 1, so that's a start.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 29, 2024
N
Verified Purchase
Nikki05
Houston, US
★★★★★ 5
Holds Backpack Straps Together
Size: 6inches-60PCS
Good quantity for its price. It’s a good quality and durable. I use it to hold my Loungefly backpack straps that I hang on my wall and it does its job perfectly. It’s reusable too.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 22, 2026
R
Verified Purchase
Raniel Nebrida
Massapequa, US
★★★★★ 5
Perfect for small normal cables lying around.
Size: 6inches-200PCS
Cable ties to organize my random cable is what I needed in my life. The quality is solid and it's easy to use and adjust. They hold well without slipping and the size is perfect for use with normal cables. its about 6 inches long so its gives you a little less than 3inch radius considering they way it is suppose to loop. I think realistically, its more like 2 inch radius. It is versatile and can be reused considering its velcro.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 6, 2026
C
Verified Purchase
CJKA
Omaha, US
★★★★★ 5
Perfect Velcro Cable Ties for Everyday Use!
Size: 6inches-60PCS
Great value for good quality Velcro cable ties! These are perfect for your electronic organizer bag or just to organize random loose cables around the house. Hard to tell how long they'll last, but for the price, they are easily replaceable. Highly recommend!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 16, 2026
K
Verified Purchase
Karen Czadzeck
Birmingham, US
★★★★★ 5
Good Buy
Size: 8inches-56pcs
I use a lot of these ties. They work well and the velcro lasts and doesn't get worn. This is a good value and keeps cords from looking like a spaghetti factory, no tangling keeps them under control. Would buy again.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 4, 2026

recommand products