SKU: 17794242244

Five33 Headsup 2207 1960KV Brushless FPV Drone Motor - 1 Pc.

$20.69 $22.99
Save 10%
No.2 Bestseller on salfueradeti.es >

Pay in installments of $5.75 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 4 - Aug 9

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Five33 Headsup 2207 1960KV Brushless FPV Drone Motor - 1 Pc.A super smooth, durable and efficient motor with incredible power in a lightweight package. The Freedom Spec motor When I (Evan Headsupfpv Turner) and my friend Armando decided to go all in on starting FIVE33, we set a few goals for ourselves. We wanted to come out with THE premiere racing frame, with revolutionary features never before seen in the drone industry along with top notch customer service and care for all of our supporters. We feel that

A super-smooth, durable and efficient motor with incredible power in a lightweight package. The Freedom Spec motor

When I (Evan “Headsupfpv” Turner) and my friend Armando decided to go all-in on starting FIVE33, we set a few goals for ourselves.

We wanted to come out with THE premiere racing frame, with revolutionary features never before seen in the drone industry along with top-notch customer service and care for all of our supporters. We feel that we’ve done that.

We never planned on stopping at just that though, I recently released my prop with HQ finding the likings of hundreds of pilots! We launched our first line of merch just a few days ago! And now, finally, we are releasing a truly Top-notch motor at a never before seen price.

We will bore you with all of the technical specifications at the bottom of this description for those who truly are interested. But we did something no one else has, since starting FIVE33, we decided we were going to bring REAL top-notch quality products into price ranges the average consumer could swing.

This motor at $22.99 ($21.99 if bought in a pack of 4) produced by a highly-respected company, Xnova, is held to the highest standard of motors. Making insane power, with insane efficiency, at a never before seen weight. Myself and FIVE33 refuse to make compromises and are bringing it to you at a competitive price.

I refuse to fly anything but the best quality products. When I am flying under the pressure of hundreds if not thousands of people watching and dollars on the line I must have full confidence in my gear which is what I feel this motor gives me. Complete confidence.  I can assure you that if I am willing to dump my own money into bringing this motor into the hands of as many people as possible, then this motor must be pretty special.

Check out our 22XX Motors and the rest of our Five33 Products!

Specifications:

  • Stator Diameter: 22mm
  • Stator Height: 7mm
  • KV: 1960
  • Prop Shaft Diameter: 5mm
  • Mounting: 16x16mm
  • Manufactured by XNova
  • Weight: 28.4g

    Package Includes:

    • 1 x Five33 Headsup 2207 1960KV Brushless FPV Drone Motor

    Motor spec sheet below. Testing conducted with MCK prop

    Shipping Notes
    • Free Standard Shipping on $100+ Orders to the USA.
    • Except Preorder products are shipped in 48 hours.
    • Delivery to the USA:
    1. Standard Shipping : 3-10 business days
    • If time is of the essence, please consider selecting expedited delivery for faster service.
    Exchange/Return Notes
    • We offer a 30-day return/exchange service after receiving.
    • Final sale items are not eligible for returns or exchanges.
    • To process your return/exchange, please contact us at [email protected]
    • Please click here for more details>>> Return & Exchange Policy
    SKU: 17794242244

    Discover Niche Categories That Outsell

    Top-Converting Item to Boost Your Average Order

    4.6 ★★★★★
    Based on 27 reviews
    Sort
    Highest Rating
    Newest First
    Oldest First
    Product Reviews
    T
    Verified Purchase
    Talagand
    Houston, US
    ★★★★★ 4
    Reasonably adequate room divider
    Size: 4 Panel-88'', Color: Beige
    I'm reviewing this as I assemble it. Couple things: 1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky. One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection. Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it. 2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless. 3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together. 4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place. 5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options. NOW on to the utility itself. 1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great! 2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world. 3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it. All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on October 31, 2023
    M
    Verified Purchase
    Martha Jeane
    San Leandro, US
    ★★★★★ 5
    Great for using behind me on Zoom calls
    Color: Black, Size: 1 Large Panel
    This works great as a place to put tapestries behind me when I'm on Zoom calls... much nicer than blurring out the background. Easy to put together, large, works great.
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on April 16, 2026
    W
    Verified Purchase
    Waiting to see how good it is
    Cuba, US
    ★★★★★ 5
    Good quality, very adorable solution.
    Color: Black, Size: 1 Large Panel
    Easy to put together and take apart. Wish it had a storage bag of some sort—that would be very helpful. Used it for our mom while she was on hospice at home. The wheels made it very easy to move around as necessary. Nice and tall and wide for privacy. Highly recommend.
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on September 7, 2025
    A
    Verified Purchase
    Andrew Hopkins
    Belleville, US
    ★★★★★ 4
    Nice, large room divider for privacy
    Color: Black, Size: 1 Large Panel
    Easy to assemble. Fabric screen covers the large frame very well and provides privacy by separating spaces. I would not exactly call it sturdy, but it does the job and stands freely with no problem. It’s lightweight and portable if you need to move it. Came with a screwdriver and wrench tool for assembly.
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on March 7, 2026
    Z
    Verified Purchase
    Zee
    Los Angeles, US
    ★★★★★ 5
    Solid divider
    Color: Black, Size: 1 Large Panel
    Easy to assemble, is not see through and seems sturdy. The optional wheels are a nice touch.
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on March 18, 2026

    recommand products

    Secret Path Quilted Puffer Jacket
    59.00
    Would You Tread On Me? pullover hoodie
    46.00
    Edgelord t-shirt
    26.00
    Back On My Boo Shit t-shirt
    24.00
    Would You Tread On Me? tank top
    24.00