Universal VCT baseplate (BP10) with follow focus and matte box pro kit

Universal VCT baseplate (BP10) with follow focus and matte box pro kitVCT universal baseplate BP10 (BP10) The VCT Universal Baseplate (BP10) offers a unique design, created for both amateur and professional filmmakers seeking camera supports & stabilizers of high quality. It features a front to back sliding plate allowing quick positioning of your camera accessories for an optimal adjustment of your camera's center of gravity and weight distribution. It is designed with 2 standard Arri rosettes for handles mount and

VCT universal baseplate BP10 (BP10) The VCT Universal Baseplate (BP10) offers a unique design, created for both amateur and professional filmmakers seeking camera supports & stabilizers of high-quality. It features a front to back sliding plate allowing quick positioning of your camera accessories for an optimal adjustment of your camera's center of gravity and weight distribution. It is designed with 2 standard Arri rosettes for handles mount and there is a standard quick release adapter plate compatible with most VCT tripod plate. There is also a protective rubber pads on top of the plate to protect your camera.

Two 15 mm lightweight rod blocs can be fixed to the front and rear of the baseplate, allowing you to install more camera accessories. It comes with 2 pairs of 15 mm rods (8"and 4") made of reliable aluminum coated with a clear finish. The safety ratchet knobs are built in a way to apply an optimal pressure to the rods. The thick shoulder pad produces maximum comfort and is made of gel padding and slip-free material. The baseplate is also designed with a sophisticated tool box to store your extra screws and Allen key. Quick access to your extra screws and Allen key can be a time saver, even more so, when you are in the middle of a shoot. The shoulder plate is equipped with 1/4-20 & 3/8-16 threaded holes allowing extra screws to be stored and there is a magnet at the back to attach your Allen key.

Front to back sliding plate for quick positioning of your camera accessories and an optimal adjustment of your camera's weight distribution.

Match your camera's optical center. Being able to adjust the height of your rod bloc to match your camera's optical center is exactly what you can do.

Comfortable and moveable shoulder pad made of slip-free material and gel padding (BP-0100).

Front and rear 15 mm lightweight rod blocs with 2 pairs of 15 mm rods (8", 4") to mount more camera accessories.

Safety pins prevents the upper plate from sliding.

Ratchet knob applies an optimal pressure to the rods.

Sophisticated tool box to store your extra screws and Allen key

Compatible with the following cameras: RED (DSMC2) Arri (Amira and Alexa Mini) Sony (Venice, FS7, FS7M2, F5, F55, EX1, EX3) Canon (C200, C300, C300M2, C700) Panasonic (EVA1, Cinema Varicam LT 4k S35, Panasonic Ag-af100, Panasonic Ag-af101 Varicam LT, Panasonic P2) Blackmagic (Ursa Mini) and many other camera models with interchangeable lenses

15 mm in rods (15TUBE4) One pair of SHAPE 15-mm aluminum rods for your compatible camera rig. Mount any 15-mm compatible accessories and form the support structure of your rig.

15-mm diameter

4-in length

Hollow, non-threaded

Tapered ends for easy connection to a rod block

Aluminum coated with a clear finish

15 mm 8 in rods (15TUBE8) One pair of SHAPE 15-mm aluminum rods for your compatible camera rig. Mount any 15-mm compatible accessories and form the support structure of your rig.

15-mm diameter

8-in length

Hollow, non-threaded

Tapered ends for easy connection to a rod block

Aluminum coated with a clear finish

Telescopic SHAPE black handle Arri rosette (HAND12SHADOW) Left and right telescopic handgrips with ARRI rosettes that can be attached to cameras or camera support hardware that has standard ARRI rosettes, which allow you to lock your arms in place. Each arm features four points of articulation (2 Push-button and 2 ratchet knob) to adjust the arms position. The ratchet knob along the arms allows you to extend the arms up to 2 inches and rotate the handgrips throughout 360. The one near the rosette gives you more option to position the arm for your comfort.

SHAPE is well known for its patented Push-button handle, now used by so many professionals in the industry. The technology was developped to give filmakers quick and easy adjustment. By simply pressing the button, you are allowed a 360-degree rotation to place the handle in the best position for your use. Push, adjust, release, and then its lock. The Push-button system on the Handle articulating joint provides additional articulation near the rosette, while the second push-button articulation joint allows you to rotate and precisely position the rubber handgrips.

SHAPE matte box swing-away (AKSWA) The SHAPE Matte Box Swing Away is a silicone matte box mounted on a CNC aluminum main frame with an outer diameter of up to 124 mm. It provides a wide field of view for a variety of wide-angle lenses. Two 4-5.6 filter trays (one rotary) with easy access handles that allow one-handed filter changes. 4-4 filters can also be installed in the trays. The frame includes two stops at the bottom of the filter trays section to prevent the filters from falling through. The removable swing-away module makes lens changes a snap. A spring pin helps to lock the mechanism closed without manually setting the pin. 2 magnets hold it in place when closed.

Removable height adjustable rod block with one tightening knob allows micro-adjustment of height, ensuring compatibility with a wide range of lenses. The rod block can be re-installed directly on the main frame for a straight configuration. The complete kit allows three different configurations, (swing-away, straight and clip-on).

Removable light carbon fiber french flag can be attached to the top to prevent flares. A series of adapter rings are included in the kit:

Clamp-on adapter ring: 124-87 mm

Threaded aluminum adapter rings: 87-82 mm, 87-77 mm, 87-72 mm, 87-67 mm

Fabric knicker: 124 mm

Follow Focus Pro (FFPRO) Manufactured in sleek black anodized aluminum, this special edition professional follow focus unit combines a refined look with trusted engineering and a classic design. The SHAPE Follow Focus Pro is an industry workhorse and has already proven itself on countless tough shoots all over the world, so you needn't worry about it letting you down. The SHAPE engineering team is internationally renowned for creating one of the most robust motion picture accessories ever built. It mounts on 15 mm rods and features an adjustable arm which puts the gear at the optimal position for the lens, no matter what the diameter is. Two 0.8 pitch gears come included and give you a choice of either 28 teeth or 43 teeth, depending on the throw distance of the lens. Additional features include two adjustable hard stops, removable marking disc, and an industry standard accessory port for using optional whips and cranks.