HydroLogic® Stealth-RO™ 150 & 350 Membrane

HydroLogic® Stealth-RO™ 150 & 350 MembraneThe HydroLogic Membrane Element delivers high efficiency reverse osmosis filtration, removing up to 98% of total dissolved solids (TDS) for consistently clean water. RO performance is affected by source water temperatureat 77F, the system operates at 100% of its rated output, with production increasing or decreasing as temperatures change. Membranes should be replaced when product water output declines and or PPM levels rise. Allow the system to run

The HydroLogic® Membrane Element delivers high-efficiency reverse osmosis filtration, removing up to 98% of total dissolved solids (TDS) for consistently clean water. RO performance is affected by source water temperature—at 77°F, the system operates at 100% of its rated output, with production increasing or decreasing as temperatures change.

Membranes should be replaced when product water output declines and/or PPM levels rise. Allow the system to run for one hour before use after installation. The Stealth-RO300™ system uses two membranes, which should always be replaced at the same time.

Stealth-RO™ Membrane Features:

• For Stealth-RO™ 150 and Stealth-RO™ 300 Systems
• Up to 98+% PPM Rejection
• 1 membrane for stealth-RO150 and 2 membranes for the stealth-RO300
• Filters up to 150 GPD (gallons per day)
• Replace between 6 months to 2 years

Specifications:

• Membrane Type: Thin Film Composite
• Maximum Operating Temperature: 113°F (45°C)
• Maximum Operating Pressure: 100 PSI
• Maximum Feed Water Turbidity: 1 NTU
• Maximum Feed Sit Density Index (SDI): 5 SDI
• Chlorine Tolerance: <0 PPM
• Dimensions (H x W): 12" x 2.125"
• Weight: 0.525 lbs