APC Smart-UPS Battery Backup & Surge Protector with SmartConnect

Designed for servers, point-of-sale, routers, switches, hubs, and other network devices, the Smart-UPS Battery Backup with SmartConnect from APC delivers intelligent and efficient network power protection from entry level to scalable runtime. It can provide 395 minutes of use at 50W, 181 minutes of use at 100W, 99 minutes of use at 200W, 66 minutes of use at 300W, 49.1 minutes of use at 400W, 38.4 minutes of use at 500W, 31.2 minutes of use at 600W, 26 minutes of use at 700W, 22 minutes of use at 800W, 19 minutes of use at 900W, 16.5 minutes of use at 1000W, 12.9 minutes of use at 1200W, 10.3 minutes of use at 1400W, 8.3 minutes of use at 1600W, 6.8 minutes of use at 1800W, and 5.6 minutes of use at 2000W, 3.5 minutes of use at 2500W, and 2.8 minutes of use at its full load of 2700W.

This Smart-UPS features an output of 2700W / 2880 VA, an input of 120V @ 50/60 Hz ±3 Hz, six NEMA 5-15R and two NEMA 5-20R battery backup and surge outlets, a NEMA L5-30P input connection, a surge energy rating of 459 joules, line interactive topology, and a sine waveform. Included PowerChute Network Shutdown management software helps to provide unattended, yet proper shutdowns of network operating systems, and also included are rack-mounting support rails, rack-mounting hardware, an RS-232 cable, and a USB cable. Support is provided by a limited 3-year repair or replace warranty that excludes the battery, as well as a limited 2-year battery warranty and a limited lifetime $150,000 equipment protection policy.

APC SmartConnect makes the Smart-UPS more adaptable and easier to deploy, enabling you to view the status of your UPS through a secure web portal. Through this remote management interface, you'll receive automatic notifications, firmware updates, and advanced support.

SMT3000RM2UC

Adjustable Voltage Sensitivity

Provides the ability to adapt the UPS for improved performance in specific power environments or generator applications.

Adjustable Voltage-Transfer Points

Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.

Audible Alarms

Provides notification of changing utility power and UPS power conditions.

Automatic Restart of Loads After UPS Shutdown

Automatically starts up the connected equipment upon the return of utility power.

Automatic Self-Test

Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Battery Failure Notification

Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Boost and Trim Automatic Voltage Regulation (AVR)

Gives higher application availability by correcting low and high voltage conditions without using the battery.

Disconnected Battery Notification

Warns when a battery is not available to provide backup power.

Energy Meter

Provides actual kilowatt hours of usage for energy conscious users.

Green Mode

Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve higher operating efficiency without sacrificing protection.

Hot-Swappable Batteries

Helps ensure clean, uninterrupted power to protected equipment while batteries are being replaced.

Intelligent Battery Management

Maximizes battery performance, life, and reliability through intelligent, precision charging.

Intuitive LCD Interface

Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with user-friendly navigation keys.

LED Indicators

Provide easy-to-read status of the unit and utility power conditions.

Network Manageable

Provides remote power management of the UPS over the network.

Outlet Group Control

Turn on/off, reboot, or shut down select outlet groups to save dispatching technicians to remote locations.

Predictive Replace Battery Date

Dynamically provides the month and year when battery replacement is recommended to aide in long-term maintenance planning.

Pure Sine Wave Output on Battery

Simulates utility power to provide a high degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.

Sequenced Network Shutdown and Reboot

Customize network shutdown and reboot sequence of connected servers and UPSs.

Serial Connectivity

Provides management of the UPS via a serial port.

Sine Wave Output

Helps eliminate humming and heat generated when powering tubelights and fans.

Single Switched Outlet Group

Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off, and non-critical load shedding.

StruxureWare Data Center Expert Compatible

Enables centralized management via StruxureWare Data Center Expert.

Temperature-Compensated Battery Charging

Prolongs battery life by regulating the charge voltage according to battery temperature.

USB Connectivity

Provides management of the UPS via a USB port.

User-Replaceable Batteries

Increases availability by allowing a trained user to perform upgrades and replacements of the batteries, thus reducing the Mean Time to Repair (MTTR).