mapei planiseal 88 repair mortar 25kg

mapei planiseal 88 repair mortar 25kgMapei 's Planiseal 88 is a high quality osmotic cementitious mortar specifically designed for waterproofing masonry and concrete structures, even under backpressure conditions. Its formulation makes it suitable for contact with drinking water, meeting safety standards for use in tanks and pipelines for water intended for human consumption. CHARACTERISTICS Product type: Osmotic cementitious mortar. Presentation: 25 kg bags. Available color: Gray.

Mapei 's Planiseal 88 is a high-quality osmotic cementitious mortar specifically designed for waterproofing masonry and concrete structures, even under backpressure conditions. Its formulation makes it suitable for contact with drinking water, meeting safety standards for use in tanks and pipelines for water intended for human consumption.

CHARACTERISTICS

• Product type: Osmotic cementitious mortar.
• Presentation: 25 kg bags.
• Available color: Gray.
• Estimated consumption: Approximately 1.5 kg/m² per mm of applied thickness.
• Application: It can be applied with a brush, trowel or mechanical projection.
• Mixing duration: Approximately 1 hour.
• Interval between coats: Apply the second coat after 5 hours and within 24 hours of the first application.
• Commissioning: After 7 days of curing.
• Application temperature: Between +5°C and +35°C.
• Storage: Up to 12 months in its original packaging, in a dry place.

RECOMMENDED USES

Planiseal 88 is ideal for:

• Waterproofing of foundations, basements and buried walls.
• Lining of swimming pools, tanks and drinking water cisterns.
• Protection of structures exposed to constant humidity or leaks.
• Waterproofing of tunnels, galleries and other underground infrastructure.

This mortar is especially effective in situations where a waterproof barrier resistant to reverse hydrostatic pressure is required, such as in walls that retain groundwater.

PREPARATION

To prepare the product, mix the contents of the bag (25 kg) with approximately 5.5 to 6 liters of clean water until a smooth, lump-free mixture is obtained. Application should be carried out on clean surfaces, free of dust, oil, or any material that could impede adhesion. It is recommended to pre-moisten the surface without leaving any standing water before applying the product.

CERTIFICATION AND REGULATIONS

Planiseal 88 complies with EN 1504-2 , which regulates surface protection systems for concrete, ensuring its effectiveness and durability in structural applications.