Bilt Hamber Dynax-S50 5ltr Extreme duty anti-corrosion wax for cavities

Bilt Hamber Dynax-S50 5ltr Extreme duty anti-corrosion wax for cavitiesDynax S50 is a high performance anti corrosion wax that provides exceptionally long lasting protection to steel surfaces. It creeps into welded seams and seals surface defects. Dynax S50 forms a soft, brown, wax like film that self heals in the event of disruption. It is also able to arrest existing corrosion and to provide long term protection to pre corroded and corrosion free surfaces. FEATURES: Class leading long term protection for cavities,

Dynax-S50 is a high-performance anti-corrosion wax that provides exceptionally long-lasting protection to steel surfaces. It creeps into welded seams and seals surface defects. Dynax-S50 forms a soft, brown, wax-like film that self-heals in the event of disruption. It is also able to arrest existing corrosion and to provide long-term protection to pre-corroded and corrosion-free surfaces.

FEATURES:

• Class-leading long-term protection for cavities, voids, chassis, doors, mud traps, machinery, boats, etc.
• Resistant to changing conditions found in cavities, others are not.
• Self-healing, protects even if the film is cut.
• Clings to vertical surfaces.
• Displaces moisture.
• Kills existing corrosion.
• Deeply penetrates flanges and folded seams.
• Easy to use ‚ atomises superbly.
• Low odour.
• See-through coating with brown tint.
• Provides lubrication.
• Available in ready-to-use modular injection system.
• Multiple aerosols will be discounted. Single 750ml aerosols are supplied with one injection lance; multiple aerosols will be supplied with one injection lance for every two aerosols. The lances are reusable; please refer to the Injection Lance listing for more information.

HOW TO USE:

Use a brush, roller, or spray to apply Dynax-S50. Atomisation into enclosed cavities and voids is recommended to ensure thorough coverage of all surfaces. Dynax-S50 contains highly polar corrosion inhibitors that are able to displace surface moisture; very wet surfaces should be pre-treated using Bilt-Hamber Ferrosol.

Dynax-S50 aerosols require no compressor or additional equipment.

Dynax-S50 is also available in 5 litre tubs to 200 litre drums and upwards for spray application. For those without access to professional wax injection equipment, Bilt-Hamber Laboratories have developed a superb system enabling Dynax-S50 to be applied at high pressure simply, quickly, and without mess. The pressurised giant-sized Dynax-S50 aerosol dispenser accepts interchangeable heads: The 60cm cavity injection lance has a precision fluid-tip to deliver, at high pressure, a dense, finely atomised circular mist of Dynax-S50 ensuring 360-degree coverage of box sections and cavities. For accessible areas, the extension tube is removed and a solid-cone spray pattern actuator is simply clipped in its place. The pressurised aerosol dispensers contain a useful 750 ml (3/4 of a litre) of material.

Dynax-S50 Pack with 60cm cavity injection lance.

Dynax-S50 is tolerant of a broad range of application pressures and will form a coherent film upon application. Dynax-S50 will increase in viscosity at low storage temperatures.

It is recommended to place the container in a room at around 15 degrees C for 24 hours prior to use, particularly when using low-pressure equipment for spray application.

For non-aerosol dispensed Dynax-S50, warming the container (loosen cap first) by standing in a hot water bath will further reduce viscosity and is beneficial where deep crevice protection is required. Never heat aerosol dispensed product. Ensure that cavities are left unclosed for a period of 48 hours to allow the escape of carrier materials before bunging or stopping.

Dynax-S50 will provide excellent protection at a wide range of film thickness ‚ aim to achieve a uniform dry-film thickness of around 50 microns. The tolerance of the material to maintain protection at very low film thickness makes Dynax-S50 the ideal choice where surface inspection is not easy or where uniform coatings are simply not possible.

Dynax-S50 has been proven to substantially outperform competitive materials in salt-spray trials under conditions of ASTM B117.

Dynax-S50‚ soft-film is optimised for enclosed cavities where extremely corrosive conditions develop. Dynax-S50 is also recommended for protection of valuable machinery and components in transit, machine tools, moulds, etc. Dynax-S50 can be removed using a suitable solvent. Dynax-S50 is not formulated for prolonged exposure to ultra-violet (UV) light.

The advanced metal-seeking anti-corrosion molecules which form Dynax-S50 are able to displace water, so even damp surfaces can be protected. These same molecules arrest and prevent corrosion even on already rusty surfaces and provide remarkable self-healing abilities if the film is damaged. Whilst Dynax-S50 is primarily a cavity rustproofing compound, it‚ also able to prevent corrosion in a multitude of mud traps and water collecting voids. Dynax-S50 has been used with superb results to protect voids and cavities in steel boats, vessels, offshore installations, and other steel structures subject to severely corrosive atmospheres.