Outdoor Master Orca Pro - 25 PSI Rechargeable Electric SUP Pump

Rechargeable, portable, and built for high pressure. Orca Pro is a dual-stage electric iSUP pump with an internal 74 Wh battery. Set your PSI and it inflates accurately up to 25 PSI, then stops automatically at your target.

What makes this pump good

• Built-in power – internal 74Wh battery for cordless inflation away from the mains.
• 25 PSI capability – suitable for high-pressure iSUPs and larger multi-person boards.
• Fast inflation claim – inflates a ~300L board to 15 PSI in about 5 minutes (manufacturer data).
• Dual-stage motor – high-volume first, then high-pressure to reach target PSI.
• Set-and-stop control – digital pressure selection with automatic shut-off.
• Inflate & deflate – one unit handles setup and tight pack-down.
• 8-nozzle kit – compatibility for iSUP (H3/HR) and other inflatables.

Real-world performance

Dual-stage inflation moves high air volume first, then builds pressure to your set PSI (up to 25 PSI). A 10’6″–11′0 board (around 240–300L) typically completes in the single-digit minute range. Actual time varies with board volume and ambient temperature.

Features & specifications

• Dual-stage inflation (high volume → high pressure)
• Real-time digital pressure display with auto shut-off
• Inflate & deflate modes
• Internal battery: 74Wh (approx. 7400mAh)
• 8 versatile nozzles included
• Wall charging with included adapter
• Certified: CE • UKCA • RoHS • REACH • CP65

*Times and counts vary with board volume, target PSI, and ambient temperature.

What’s in the box

• Outdoor Master Orca Pro rechargeable SUP pump
• Carry bag
• Wall charging adapter
• Reinforced hose
• 8-nozzle adapter kit (incl. H3/HR)
• User guide

Setup tips

• Check the iSUP valve is in the inflate position.
• Set your target PSI before you start.
• Fit the hose securely with the correct nozzle and seal to avoid small leaks.
• Charge fully before cordless use; recharge after sessions.
• Use deflate at the end to remove residual air for a compact roll-up.

FAQ

Does it have a built-in battery?

Yes. Orca Pro has an internal 74 Wh rechargeable battery for cordless inflation.

How many boards per charge?

Up to around three inflations per full charge under typical conditions. Larger boards or higher PSI targets reduce the count.

What’s the maximum PSI?

Up to 25 PSI.

What’s the quoted inflation time?

Manufacturer guidance states ~5 minutes to reach 15 PSI on a ~300 L board.

Which valves does it fit?

Compatible with Halkey-Roberts (H3/HR) via the supplied adapter, plus other fittings using the included nozzles.

How should I store the Orca Pro?

The Orca Pro has complex internal circuit boards and battery, treat the Orca Pro in the same way you would a laptop or other electrical equipment. Be careful not drop the pump and do not expose it to long periods of low temperatures. (Avoid storing it in the garage or other cold areas during winter).

Our take

High-pressure capability, fast inflation claims, and a 74Wh battery make the Orca Pro a strong cordless option when you want accurate control and quick turnaround without relying on external power.