eporip mapei epoxy adhesive

eporip mapei epoxy adhesiveEporip from the Mapei brand is a solvent free epoxy adhesive, consisting of two pre dosed components (component A = resin and component B = hardener) that must be mixed together before use. CHARACTERISTICS Eporip has the consistency of a slightly thixotropic paste that can be applied with a brush on both horizontal and vertical surfaces. Eporip polymerizes without shrinkage and, once hardening is completed, it is impermeable to water, has optimal

Eporip from the Mapei brand is a solvent-free epoxy adhesive, consisting of two pre-dosed components (component A = resin and component B = hardener) that must be mixed together before use.

CHARACTERISTICS

• Eporip has the consistency of a slightly thixotropic paste that can be applied with a brush on both horizontal and vertical surfaces.
• Eporip polymerizes without shrinkage and, once hardening is completed, it is impermeable to water, has optimal dielectric properties and high mechanical characteristics, as well as adhesion to concrete and steel.
• Eporip responds to the principles defined by EN 1504-9 (“Products and systems for the protection and repair of concrete structures: definitions, requirements, quality control and conformity assessment. General principles for the use of products and systems”) and to the minimum requirements required by EN 1504-4 (“Structural gluing”)

TO IMPORTANT NOTICES

• Do not apply Eporip with temperatures below +5° C
• Do not apply Eporip on wet surfaces (although it tolerates slight humidity)
• Do not pour fresh concrete over hardened Eporip
• Do not apply Eporip on dusty, friable or inconsistent supports.

FIELDS OF APPLICATION

• Creation of monolithic work joints between fresh concrete and hardened concrete
• Gluing precast concrete elements
• Mixed concrete-steel gluing
• Filling cracks in concrete

Some application examples

• Union bridge in structural reinforcements of beams and pillars
• Union bridge over degraded industrial pavements
• Union bridge in waterproof rigid joints (for example, tank foundation slab-wall)
• Reinforcement of beams using the metal cladding technique
• Sealing fissures or cracks in cementitious screeds

CONSUMPTION

Consumption varies depending on the irregularities present in the support and the method used for its application.

Indicatively:

– connecting bridge on a rough support: 0.5 ÷ 0.7 kg/m²;

– connecting bridge on very irregular supports: 1.0 ÷ 2.0 kg/m²;

– crack sealing: 1.35 kg/l of cavity to be filled;

– gluing prefabricated concrete elements

or concrete-steel: 1.35 kg/m² per mm of thickness.

COLOR

• Component A: Gray
• Component B: White
• Mixed: gray

PRESENTATION

• Lot of 10 kg (component A: 7.5 kg. + component B: 2.5 kg)
• 2 kg batch (component A: 1.5 kg + component B: 0.5 kg)