Pay in installments of $30.92 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 26 - Jul 31
For Your Every Summer RSVP, with Code: SUMMER15
Description
Seoladair Boomkicker 25-30' BoatsProduct Description Seoladair Boomkicker 25 30' Boats Specifications: Suggested Boat Size: 25 30' Initial Pin to Pin: 45" Minimum Pin to Pin: 35" Maximum Force: 400 lbs. Stroke Initial Min.: 15" 6" Measuring: Some basic measurements can insure a proper fit. First the Boomkicker must provide enough support for the boom and mainsail if the mainsail is stored folded or flaked on the boom and second, if there is an existing vang, the Boomkicker needs to
Product Description
Seoladair Boomkicker 25-30' Boats
Specifications:
Suggested Boat Size: 25-30'
Initial Pin to Pin: 45"
Minimum Pin to Pin: 35"
Maximum Force: 400 lbs.
Stroke Initial/Min.: 15"/6"
Measuring:
Some basic measurements can insure a proper fit. First the Boomkicker must provide enough support for the boom and mainsail if the mainsail is stored folded or flaked on the boom and second, if there is an existing vang, the Boomkicker needs to fit in the area above.
Support:
To determine the model with sufficient return force to support the boom, one easy method is to weigh the aft end of the boom and compare it to 1/12 the maximum force in the table. 1/12 of the maximum forces from the table are; K1500 - 50 lbs, K1000 - 34 lbs, K0750 - 21 lbs., K0400 - 13 lbs. and K0312 - 6.5 lbs.. Note these are conservative numbers for a stable boom. So for example if the aft end of the boom weighs 28 lbs., the model recommended would be the K1000. One method to weigh the aft end of the boom is to stand on a bathroom scale and note the difference when lifting the boom.
Fit:
To determine if a Boomkicker model will fit above an existing block and tackle vang, with the boom horizontal, measure the existing vang between where it attaches to the fittings on the mast and boom and subtract 7". This gives an approximate expected length for the Boomkicker which can be compared to the pin to pin lengths of the models in the table. To continue the example, if the K1000 is required for support, the minimum length needed after subtracting 7" is 35". The closer the length is to 45"(the supplied length of the K1000 Boomkicker) or longer, the better, with easier installation and less shortening required. In some cases customers have moved the vang attachment on the boom aft to get more length and better leverage on the boom. If a block and tackle vang will be added, choose the model based on support, and to avoid having to shorten, install the block and tackle vang after the Boomkicker.
Specifications:
Suggested Boat Size: 25-30'
Initial Pin to Pin: 45"
Minimum Pin to Pin: 35"
Maximum Force: 400 lbs.
Stroke Initial/Min.: 15"/6"
Measuring:
Some basic measurements can insure a proper fit. First the Boomkicker must provide enough support for the boom and mainsail if the mainsail is stored folded or flaked on the boom and second, if there is an existing vang, the Boomkicker needs to fit in the area above.
Support:
To determine the model with sufficient return force to support the boom, one easy method is to weigh the aft end of the boom and compare it to 1/12 the maximum force in the table. 1/12 of the maximum forces from the table are; K1500 - 50 lbs, K1000 - 34 lbs, K0750 - 21 lbs., K0400 - 13 lbs. and K0312 - 6.5 lbs.. Note these are conservative numbers for a stable boom. So for example if the aft end of the boom weighs 28 lbs., the model recommended would be the K1000. One method to weigh the aft end of the boom is to stand on a bathroom scale and note the difference when lifting the boom.
Fit:
To determine if a Boomkicker model will fit above an existing block and tackle vang, with the boom horizontal, measure the existing vang between where it attaches to the fittings on the mast and boom and subtract 7". This gives an approximate expected length for the Boomkicker which can be compared to the pin to pin lengths of the models in the table. To continue the example, if the K1000 is required for support, the minimum length needed after subtracting 7" is 35". The closer the length is to 45"(the supplied length of the K1000 Boomkicker) or longer, the better, with easier installation and less shortening required. In some cases customers have moved the vang attachment on the boom aft to get more length and better leverage on the boom. If a block and tackle vang will be added, choose the model based on support, and to avoid having to shorten, install the block and tackle vang after the Boomkicker.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.2 ★★★★★
Based on 17 reviews
Sort
Product Reviews
★★★★★ 4
Well made and perform well, a little constricting
Size: Medium, Color: Black Assortment (6-pairs)
These socks definitely keep most of the moisture away from my feet, even in wet conditions, which is why I bought them. I am diabetic, though, and the recommendation is to wear socks that don't constrict at any point. These have a tight band around the opening that while it is not uncomfortable on, leaves a mark when I take them off. So far it's been ok, but if you have any kind of swelling in your feet or ankles these would probably not be the best. My foot measures size 8 and I wear size 9 Brooks running shoes. The socks fit me just right but based on the size of the opening and the overall length, I wouldn't think they would fit anyone more than a size larger. Overall well made and perform well as you would expect from this brand.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 20, 2018
★★★★★ 5
long lasting!
Size: Medium, Color: Black/Assorted
literally my favorite sock i will buy forever. they just started busting through after 6 years and i wear them a lot
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 13, 2025
★★★★★ 5
Good quality
Size: Medium, Color: Black/Assorted
Comfy and sturdy
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 27, 2025
★★★★★ 5
Favorite socks
Size: Medium, Color: Black/Assorted
These are my go to socks! Love these. Great towards sweat and different weather temperatures. Mostly use for working out and love them. Will be getting more!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 9, 2024
★★★★★ 5
Great fit
Size: Medium, Color: White
Perfect fit and they don't slide off the back of your ankle.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 16, 2026