8/10 Frames Mesh Bottom Board Rubber Feet With Beetle Trap

8/10 Frames Mesh Bottom Board Rubber Feet With Beetle TrapNo Painting Needed Premium Hive Defence Built In The bottom board is the foundation of every healthy hive and most beekeepers underestimate just how much it impacts colony health. A bad bottom board means beetle infestations, moisture damage, ant invasions, and stressed colonies. Our Wax Dipped Mesh Bottom Board with Beetle Trap delivers all season hive defence in a single thoughtfully engineered unit and every board now comes wax dipped as standard,

No Painting Needed — Premium Hive Defence Built In

The bottom board is the foundation of every healthy hive — and most beekeepers underestimate just how much it impacts colony health. A bad bottom board means beetle infestations, moisture damage, ant invasions, and stressed colonies. Our Wax-Dipped Mesh Bottom Board with Beetle Trap delivers all-season hive defence in a single thoughtfully-engineered unit — and every board now comes wax-dipped as standard, no painting required, ever.

Made from premium New Zealand pine treated with hot wax that penetrates deep into the timber fibres — a traditional commercial beekeeping treatment used by serious operators for over a century. Features include a fine stainless mesh screen floor, removable beetle trap tray, slanted entrance for drainage, and rubber-lined feet for ground isolation. Every detail is engineered for genuine hive defence. Available in both 8-frame and 10-frame sizes to fit your Langstroth setup. At $71.49 (was $75.49), it’s the bottom board upgrade your colonies will thank you for — with cleaner hives, healthier brood, and dramatically less seasonal maintenance.

Why Wax-Dipped Instead of Painted?

Every bottom board we sell is wax-dipped — because it’s genuinely superior to painted timber in every way that matters:

●     No painting required — ever — the wax penetrates the timber, providing built-in weather protection that lasts the life of the board

●     Penetrates deep into the timber — unlike paint which only coats the surface, hot wax soaks into the wood fibres for genuine protection

●     Zero chemicals near your bees — just pure natural beeswax and microcrystalline wax; nothing toxic, nothing synthetic

●     Better moisture resistance — wax repels water at the molecular level; paint can crack, peel, and let moisture in over time

●     Naturally bee-friendly — bees recognise wax as part of their natural environment; some research suggests they accept wax-treated equipment faster

●     Lasts longer — wax-dipped boards typically last 20+ years vs 10–15 for well-maintained painted boards

●     No re-coating needed — painted boards need re-painting every 3–5 years; wax-dipped is a one-time treatment that’s done

What Exactly Is Wax Dipping?

Wax dipping is a traditional commercial beekeeping wood treatment that’s been used for over a century. The process is straightforward: timber components are submerged in a hot bath of beeswax mixed with microcrystalline or paraffin wax at around 150°C. The high temperature drives any moisture out of the wood, and the molten wax flows deep into the timber fibres, replacing the water and sealing the wood from the inside out. Once cooled, the timber is completely weatherproof, rot-resistant, and treated with materials that are 100% bee-safe. This is how New Zealand commercial beekeepers have protected their equipment for generations — and now you can have the same premium finish on your hive’s most important component.

How Does the Mesh + Beetle Trap Work?

This is genuinely the most effective chemical-free beetle control system available. Three-stage defence:

●     Stage 1 — Bees push beetles down — worker bees naturally try to expel beetles, herding them toward the floor

●     Stage 2 — Beetles fall through mesh — the fine stainless screen lets debris and beetles pass through but stops bees from going down

●     Stage 3 — Beetles trapped in tray — the removable tray below collects them where they can’t escape back into the hive

Result: dramatic reduction in small hive beetle populations without using any chemicals near your honey. This is exactly the approach recommended by Australian beekeeping associations — and it works year-round.

What’s the Best Substance to Use in the Tray?

Diatomaceous earth (DE) is genuinely the best choice — it’s what experienced Australian beekeepers consistently recommend. Better than cooking oil and dramatically better than nothing. Here’s why DE wins:

●     100% natural and chemical-free — just fossilised diatom shells; completely safe near your honey and bees

●     Mechanically kills beetles — the microscopic sharp edges of the DE particles damage the beetles’ exoskeletons and dehydrate them; no chemicals needed

●     Stays dry and effective longer — oil pools turn rancid in hot weather and need replacing every 1–2 weeks; DE stays effective for months

●     No mess or smell — oil leaks if the tray is bumped and creates a sticky cleanup; DE is a clean dry powder

●     Won’t attract bees — bees can be drawn into oil traps and drown; DE doesn’t attract them

●     Cheap and easy to find — food-grade DE is widely available; a single bag treats your traps for an entire year

●     How to use: sprinkle a thin layer (about 5–10mm deep) across the bottom of the tray; slide back into position; check and refresh every 1–2 months during beetle season. That’s it.

Why Is the Slanted Entrance Important?

Water is the silent killer of beehives. Standing water at the entrance leads to mould, mildew, rotted timber, drowned bees, and seriously stressed colonies. A slanted entrance solves this elegantly: rainwater that hits the entrance immediately flows down and away from the hive rather than pooling. This single design detail transforms hive longevity in regions with regular rainfall (which is most of Australia). Combined with the rubber-lined feet keeping the entire board off the ground, your hive sits in genuinely dry, well-drained conditions year-round — even during heavy autumn storms.

What Do the Rubber-Lined Feet Actually Do?

Four genuine practical functions:

●     Ground moisture barrier — lifts the entire bottom board off the wet ground; prevents the rot and decay that destroys hives sitting directly on damp soil

●     Insect protection — makes it harder for ants, termites, and crawling insects to reach the hive entrance

●     Vibration dampening — absorbs minor ground movement that would otherwise stress the bees

●     Stability — provides level support on uneven ground; prevents the hive tilting and collecting moisture

●     Beekeeper-friendly tip: Combined with a proper hive stand, the rubber-lined feet add genuine extra protection — don’t skip the stand thinking the feet are enough.

How Does Dual-Function Ventilation Work?

This is one of the smartest features. The removable tray gives you two distinct operating modes depending on the season:

●     Tray IN — Beetle protection mode (autumn, winter, spring): tray catches beetles and debris; standard configuration most of the year

●     Tray OUT — Summer ventilation mode (hot weather): removing the tray opens full mesh ventilation under the hive; dramatically reduces internal temperature and humidity

During Australian summer heatwaves, hive overheating is a real problem — brood can die, queens stop laying, and colonies cluster outside the hive. The open-tray ventilation mode lets the colony breathe through the floor, dropping internal temperatures by 5–10°C on extreme days. Slide the tray back in when temperatures normalise. Seasonal adaptability without buying separate equipment.

Should I Get 8-Frame or 10-Frame?

Choose based on your hive system:

●     8-Frame (50.5cm × 35.5cm): if you have an 8-frame Langstroth hive system — the lighter, more approachable beekeeping standard that’s growing in popularity

●     10-Frame (50.5cm × 40.5cm): if you have a standard 10-frame Langstroth system — the most common Australian configuration

●     Important: 8-frame and 10-frame components are NOT interchangeable. Make sure to select the size that matches your existing brood boxes and supers. If you’re building a new hive, our matching 8-frame and 10-frame Ideal boxes pair perfectly with this bottom board.

How Do I Maintain the Bottom Board?

Maintenance is genuinely minimal thanks to the wax-dipped finish:

●     Empty the beetle trap tray every 1–2 months during beetle season — just slide out, dispose of contents, refill with DE, slide back

●     Clean the mesh screen annually with a soft brush — remove accumulated wax debris and propolis

●     Check rubber-lined feet annually for wear or ant damage — replace if needed (parts available)

●     Exterior maintenance — essentially zero; the wax dipping does all the protection work

●     No re-painting ever — unlike painted bottom boards that need re-coating every few years, your wax-dipped board is a permanent solution

Who Is This Bottom Board Built For?

This bottom board is essential equipment for any serious Australian beekeeper. It’s especially valuable for anyone with small hive beetle pressure (most of Australia), backyard beekeepers wanting set-and-forget pest control, hobbyists upgrading from solid timber bottom boards to better-performing mesh designs, commercial beekeepers needing reliable bulk hive equipment, beekeepers in humid or wet climates (coastal Queensland, NSW, Victoria) where moisture is a constant threat, anyone tired of repainting hives, and new beekeepers building their first hive from quality components.

Specifications

●     Type: Wax-dipped mesh bottom board with beetle trap and rubber-lined feet

●     Material: Premium New Zealand pine, wax-dipped

●     Finish: Wax-dipped — no painting required, ever

●     Wax-dipping benefits: Deep timber penetration, chemical-free, bee-friendly, 20+ year lifespan

●     Size options: 8-Frame (50.5cm × 35.5cm) OR 10-Frame (50.5cm × 40.5cm)

●     Compatibility: Standard Langstroth 8-frame and 10-frame hive systems

●     Mesh screen: Fine stainless steel — prevents bee passage, allows beetle drop-through

●     Beetle trap: Removable galvanised tray — easy emptying and cleaning

●     Recommended tray substance: Food-grade diatomaceous earth (DE) — chemical-free, long-lasting

●     Entrance: Slanted design — directs rainwater away from hive

●     Feet: Rubber-lined — ground isolation, moisture barrier, ant protection

●     Ventilation: Dual-function tray (in for beetle control, out for summer ventilation)

●     Lifespan: 20–25+ years with proper care

●     Customer rating: 4.9/5 stars

Why Buy From Beekeeping Gear?

Beekeeping Gear has been Australia’s trusted source for hive components, IPM equipment, and serious beekeeping essentials since 2016. We supply real Australian beekeepers from our showrooms in Granville (next to Clyde train station) and Meadowbrook (QLD), plus fast Australia-wide shipping on every order. The wax-dipped finish is exclusive to our Beekeeping Gear range — you won’t find this premium finish on most competitor bottom boards. Drop into the showroom to see the difference in person, or call us on 1300 692 766 for advice on building a complete healthy hive system.

Order your Wax-Dipped Mesh Bottom Board today — the all-season hive defence with built-in beetle control, moisture management, and zero painting required for the life of the board.