US$ 135060.00
Sold : Login>>
Pay in installments of $13858.12 with
,
and
Ships within 48 hours · Estimated delivery Jul 22 - Jul 27
For Your Every Summer RSVP, with Code: SUMMER15
Louroe ASK-4 #122 Audio Monitoring Kit2 Zone Audio Monitoring System Interfaces with Line Level Input Devices Built In Speaker for Live Audio from DVR Headphone Jack Included for Privacy Base Station Supports 2 Louroe Mics 2 Omnidirectional Mics Included Mics Pick Up Sounds Up to 15' Sturdy ABS Microphone Housing Mics with Built In Sensitivity Switch Place Mics Up to 1000' from Base Station The ASK 4 #122 Audio Monitoring Kit from Louroe Electronics is a 2 zone audio monitoring system
The ASK-4 #122 Audio Monitoring Kit from Louroe Electronics is a 2-zone audio monitoring system designed for audio monitoring and interfacing with DVRs, VCRs, or other audio devices that accept line level input. This kit consists of an AP-2 Desktop Base Station, 2 Verifact A Microphones, an AD-1 Plug-In Switching AC Adapter, and a Dual RCA Cable for connection to a DVR / VCR or other audio devices that accept line level input (0 dB @ 600?). It is suitable for use in convenience stores, fast food restaurants, booking rooms, interrogation rooms, day care centers, sleep disorder centers, therapy labs, cashier booths, gas stations, or anyplace where CCTV cameras are installed.
The AP-2 Desktop Audio Base Station is a non-alarming audio monitoring base station that provides 2 audio zones. The AP-2 audio base station will accommodate 2 Louroe microphones and has 2 line level audio outputs. It contains a 3" (7.62cm) built-in speaker for producing live audio and audio playback from a DVR. In addition, it also contains a selectable RCA audio output for interfacing with a DVR with only one audio input, or with a VCR. Zone selection can be done by using the pushbutton.
The Verifact A Microphone is an omni-directional, low impedance, electret condenser microphone with a built-in preamp for producing line level audio. It is housed in a high impact ABS dome designed for ceiling or wall mounting. The normal pick-up pattern is approximately up to 15' (4.57m) from the microphone location towards all directions, or within a�30' (9.14m) diameter circle.
Note: Wiring Requirements: 2-conductor shielded cable, 22 gauge with a 24 gauge drain wire.
Unshielded cable is not suitable for audio systems.
When this equipment is used as part of an audio monitoring system, the law requires that the public be given notice of AUDIO MONITORING ON THE PREMISES. A decal notice is included with each microphone shipped.
�
�
| Base Station | |
|---|---|
| Input Sensitivity | 0.78 Vrms from remote microphone |
| Output Power | Monitored: 1.5 W @ 8 ? |
| Line Output Impedance | 600 ? or higher (for audio) |
| Audio Input Impedance | 10 k? |
| Frequency Response | 100 Hz to 10 kHz |
| Headphone Impedance | 8 to 600 ? |
| Power Supply | 12 VDC, 500 mA |
| Dimensions (L x W x H) | 8.50 x 9.50 x 2.13" (21.59 x 24.13 x 5.41 cm) |
| Weight | 3.5 lb (1.6 kg) |
| Microphone | |
|---|---|
| Type | Electret condenser microphone |
| Output | Line level (0 dB @ 1,000 ?) |
| Frequency Response | 40 Hz to 15 kHz � 1 dB |
| Current Drain | 4 mA |
| Supply Voltage | 12 VDC, 500 mA |
| Dimensions (� x H) | 4.0 x 1.5" (10.2 x 3.8 cm) |
| Adapter | |
|---|---|
| Input | 100 to 240 VAC, 60 Hz, 0.3 A |
| Output | 12 VDC, 500 mA |
| Packaging Info | |
|---|---|
| Package Weight | 3.0 lb |
| Box Dimensions (LxWxH) | 22.2 x 10.4 x 9.8" |