Newmar PT-40U Battery Charger

Newmar PT-40U Battery ChargerPT 40U Battery Charger Newmars Phase Three Series Battery Chargers employ Smart battery charging technology for 12 volt systems aboard marine applications including workboats, military vessels, commercial vessels, and recreational craft. This charger interacts with batteries, providing the optimum three stage charge process for fast recovery and conditioning, maximizing performance, and extending battery life. A selector switch adjusts output voltage

PT-40U Battery Charger

Newmars Phase Three Series Battery Chargers employ Smart battery charging technology for 12-volt systems aboard marine applications including workboats, military vessels, commercial vessels, and recreational craft. This charger interacts with batteries, providing the optimum three-stage charge process for fast recovery and conditioning, maximizing performance, and extending battery life.

A selector switch adjusts output voltage to adapt to gel-cell, flooded lead-acid, or AGM battery types. An optional temperature compensation sensor also adjusts output for ideal voltage based on changes in the batteries ambient temperature. This model is housed in a rugged stainless steel case with a durable white powder coat finish, and the internal circuitry is polyurethane coated for maximum corrosion resistance.

Features:

• 12-volt model


• Smart circuitry provides three-stage charging bulk, absorption, and float


• Gel-Cell/Flooded Lead-acid/AGM battery type switch selects optimum charge/float voltages


• Multiple isolated output banks; ammeter indicates total output current. (Except PT-7)


• The optional sensor adjusts the output voltage based on battery temperature. (Except PT-7)


• Current limitations prevent damage from overloading


• Clean well-regulated output can be used as a power supply; can power loads directly without a battery in line


• Built to last rugged stainless steel case with a durable white powder coat finish, an optional drip shield, and marinized internal circuitry


• Protection: Current Limiting, Thermal Protection, Forced Air Cooling, Drip Shield


• ABS-type approval for battery charging and power supplies

Specifications:

• Input VAC (50-60 Hz.): 90-264


• Input Amps @ Full Load: @ 115 VAC: 6.8, @ 230 VAC: 3.4


• Power Factor: .98 @ 115V and .95 @ 230V


• Max Output Amps: 40


• Output Banks: 3


• Battery Capacity (Amp-Hours): 80-400


• Operating Temp. Rating Reference: T-5


• Case Size Reference: A-3


• Case Size (H x W x D): 13.85B x 9.5 x 4.8B inches (35.2B x 24.1 x 12.2B centimeters) *Note with Dripshield installed B add .75 (1.9 cm) to height and 1.35 (3.4 cm) to depth


• Weight Lbs./Kg: 11/6


• Optional Temp. Sensor Model: TCS-12/24


• Remote Panel Model: EVM-12-2


• Equalize Option: No


• Output Indicator Reference: M-3


• Compliance Reference: CG

Temperature Rating References:

• Temperature: -20 degrees C to +70 degrees C


• Derate Linearly From 100% @ 50 degrees C to 50% @ 70 degrees C

Nominal Output Voltages at Gel/Flooded Switch Settings (without Temperature Compensation):

• Gel-Cell: 14.0 VDC Charge @ 50% load and 13.6 VDC Float @ .5 amp load


• Flooded/AGM: 14.2 VDC Charge @ 50% load and 13.4 VDC Float @ .5 amp load

Compliance References:

• CG: USCG CFR 183.410 (Ignition protected)


• CE: Carries the CE mark


• ABS: PT Series meets SVR 2009 4-8-3/5.9, Under 90 meters Rules 2006 4-6-4/7.19, and HSNC 2007 4-8-3/5.13.

Options:

• Remote Panel, model EVM-12-2, for us with model PT-40 only (Enables monitoring of when the battery charger is on and the batteries state of readiness, at a glance of two (2) battery banks only)


• Temperature Compensation Sensor, Model TCS 12/24, for use with all models except PT 7 (-5 mV per cell degrees C, 25 cable (40cable optional)