SKU: 36743032169

Maretron Submersible Pressure Transducer 0-3 PSI

Sale price$155.25 Regular price$172.50
Save 10%

Pay in installments of $43.12 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 27 - Aug 1

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Maretron Submersible Pressure Transducer 0-3 PSISubmersible Pressure Transducer 0 3 PSI Maretrons submersible pressure transducers indicate tank levels and can be installed directly in the tank. Please follow these instructions to mount and connect a submersible pressure transducer to an NMEA 2000 network via a Maretron FPM100 Fluid Pressure Monitor. Maretron recommends one of two methods for mounting a submersible pressure transducer in a tank: 1) without a restraining tube, and 2) with a

Submersible Pressure Transducer 0-3 PSI

Maretron’s submersible pressure transducers indicate tank levels and can be installed directly in the tank. Please follow these instructions to mount and connect a submersible pressure transducer to an NMEA 2000® network via a Maretron FPM100 Fluid Pressure Monitor. Maretron recommends one of two methods for mounting a submersible pressure transducer in a tank: 1) without a restraining tube, and 2) with a restraining tube.

The submersible pressure transducers are designed for a tank with a 5-hole SAE J1810 fitting at the top. Install the mounting plate with cord grip onto the transducer cable, with the rounded hex section of the cord grip facing away from the transducer.

Lower the pressure transducer into the tank such that the transducer lies at the lowest point of the tank and tighten the cord grip to secure the cable. On a tank with a flat bottom, the transducer may slide from side to side with the motion of the vessel but will not rotate due to the stiffness of the cable. It is also possible to mount the pressure transducer inside a restraining or focus tube (sold separately, Maretron part number TFT-5H).

Pressure Transducer Mounting

Connect the two wires of the pressure transducer to a free pressure monitoring channel. Connect the red wire from the pressure transducer to the channel's positive (+) terminal and connect the black wire from the pressure transducer to the negative (-) terminal of the channel. The example in Figure 1 shows the pressure transducer connected to switch channel 0, with the white wire connected to "P0+" and the brown wire connected to "P0-." Submersible pressure transducers have a small plastic vent tube in the connecting cable.

Use a Maretron DSM Series Display (firmware 1.4.7 or higher) or a PC running Maretron’s N2KAnalyzer software (version 1.4.19 or higher) to configure the connected channel(s) on the FPM100.

Supply power to the NMEA 2000 network and verify that the pressure channel indicates a valid pressure reading.

Specifications:

  • Operating Range: 0 to 3 PSI (0.207 bar)
  • Depth Range (Water): 83.1” (2.11 m)
  • Depth Range Diesel (820 kg/m3): 101.3” (2.57 m)
  • Depth Range Gasoline/Petrol (750 kg/m3): 110.8” (2.81 m)
  • Cable Length: 17 ft (5.18 m)
  • Sensor Type: Gauge (Vent Tube)
  • Output: 4 – 20 mA current loop, loop powered
  • Excitation Voltage: 8 VDC to 28 VDC
  • Compatible Fluids / Gases: Diesel, Diesel Exhaust Fluid (DEF), Gasoline/Petrol, Hydraulic Fluid, Kerosene, Motor Oil, Fresh Water, Sea Water, Waste Water
  • Operating Temperature: 14 degrees F to 158 degrees F (-10 degrees C to 80 degrees C)
  • Storage Temperature: -4 degrees F to 176 degrees F (-20 degrees C to 80 degrees C)
  • Accuracy: ±0.3% Full Scale typ. at 25°C
  • Total Error Band (TEB): ±1.0% Full Scale typ. (-10 degrees C to 70 degrees C)
  • Non-Linearity, Hysteresis (NLH): ±0.2% Full-Scale typ. Best Straight Line (BSL) at 25°C
  • Temperature Compensation: 23 degrees F to 122 degrees F (0 degrees C to 50 degrees C)
  • Accuracy: ±1% Full Scale
  • Linearity: 0.5% Full Scale
  • Repeatability: 0.05% Full Scale
  • Full-Scale Thermal Error: 0.04% Full Scale/°F (0.07% Full Scale/degrees C)
  • Long-Term Stability: 0.2% Full Scale/year
  • Response Time: 150ms
  • Proof Pressure: 2 × Full Scale
  • Burst Pressure: 3 × Full Scale
  • Reverse Voltage Protection: ± 30V for 3 minutes
  • Construction: 316L stainless steel body and diaphragm, polyether polyurethane cable, chloroprene boot
  • EMC Compatibility: 10 Volts/meter per EN 61000-4-3
  • Weight: 24.8oz (703g)

Owner's Manual (pdf)
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 36743032169

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.3 ★★★★★
Based on 24 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
J
Verified Purchase
James Jones
Natrona Heights, US
★★★★★ 5
Just right!
Size: 6.8oz/200ml Silver
Works great with my cappuccino machine. One espresso or two! Perfect fit.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 4, 2026
M
Verified Purchase
Mikey T.
Lexington, US
★★★★★ 5
Small, works with (some) induction units, just what I needed.
Size: 6.8oz/200ml Silver
It's small and the good thing about it is that it works with my induction (Nuwave Flex Precision, 1,300W.) Not perfectly, but will work. It doesn't work with my larger Duxtop (9600LS/BT-200DZ, 1,800W) because it is looking for more metal to sense before it can trigger the induction function. So, if you have a smaller induction unit it might work. If not, get a CozyKit 5.5" induction diffuser (on Amazon) and heat it up on that via induction. That diffuser should work on any induction unit. I guess we can't do links anymore even if on Amazon?? from attempting to post other reviews, so this is the text discr for the diffuser on Amazon, it's hard to find the smaller one otherwise: (Heat Diffuser Stainless Steel Induction Adapter Plate Removable Handle Coffee Milk Cookware Induction Hob Heat Cooking Diffuser for Electric Stove 5.5inch)
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 4, 2025
S
Verified Purchase
sahajanand
Boise, US
★★★★★ 4
Well-Made and Handy for Small Drinks
Size: 6.8oz/200ml Silver
This HULISEN milk frothing pitcher is well made and feels sturdy in hand. The stainless steel finish looks nice and it pours smoothly, which helps when frothing or steaming milk. The 6.8oz size is perfect for single drinks, though it may feel small if you make multiple cups at once. Overall, it does the job well and is a useful addition to a home coffee setup.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 21, 2025
N
Verified Purchase
Nestor Ramírez
Alexandria, US
★★★★★ 5
Great.
Size: 6.8oz/200ml Silver
Great, as expected. A+++
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 25, 2026
R
Verified Purchase
Ryan Chung
Chelsea, US
★★★★★ 5
So small! But it works
Size: 6.8oz/200ml Silver
Perfect for making cortados. Easy to clean — dishwasher safe.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 18, 2025

recommand products