Pay in installments of $310.62 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 19 - Jul 24
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Portable Cooling Misting SystemAn industrial water mister by Advanced Misting Systems is a complete all in one portable cooling solution. From plants to equipment, you can significantly lower the temperature wherever it's needed so any environment is more comfortable and productive. The Portable Cooling Misting System combines the cooling effect of a high velocity fan with our unique fogging nozzles to provide the feeling of up to a 30 degree Fahrenheit drop in temperature. It's
An industrial water mister by Advanced Misting Systems is a complete all-in-one portable cooling solution. From plants to equipment, you can significantly lower the temperature wherever it's needed so any environment is more comfortable and productive.
The Portable Cooling Misting System combines the cooling effect of a high-velocity fan with our unique fogging nozzles to provide the feeling of up to a 30-degree Fahrenheit drop in temperature. It's perfect for warehouses, greenhouses, factories, barns and more. You can even use it as a patio misting system to cool off guests on a hot summer day. These misters also raise the humidity, which is great for raising tropical plants.
Select models are UL507-certified for indoor or outdoor use and include a built-in GCFI plug for safety. Choose from multiple fan sizes that have eight-inch tires and comfort-grip handles to roll your mister over almost any surface. Our experts in customer services are available Monday-Friday to answer your questions. Call us toll-free at 1-888-281-9337.
Advanced Misting Systems Water Misters Features:
- When you combine the cooling effect of high-velocity air with a temperature-dropping misting/fogging adapter (up to 20 degrees in low humid air), the combination can give you the feeling of up to a 30-degree temperature drop.
- An independent shut-off valve on each nozzle ensures cooling when you need it.
- GFCI ground fault circuit interrupters on all 115V units.
- High volume/High velocity fans create cooling by air movement and the dispensing of refreshing cooling mist over a larger area.
- Tubular aluminum frame is lightweight yet durable.
- High-output performance.
- Full two-year warranty on totally enclosed, maintenance-free, direct drive high-efficiency motors with completely sealed ball bearings. Each motor has UL and ULC certification along with built-in automatic thermal overload protection.
- One-year warranty on all other parts.
- Comes in 18-inch, 24-inch and 30-inch sizes.
Standard Features
| Independent shut-off nozzles | GFCI plug-in attached | ||
|---|---|---|---|
| Lock pins for fold-down option | Independent fan and mist switches | ||
| Comfort-grip handles | Comfort-grip handles | ||
| Rugged 8" tires |
Fan Performance Specifications
Select your desired fan model from the drop-down box at the top right of the page. Sizing information is below.
| Model No. | Size | HP | Volt | Amps | HZ | Phs | Spd | CFM Hi/Med/Low |
Noise Hi/Med/Low |
RPM Hi/Med/Low |
Drive | Blade |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| VPC18-POW | 18" | 1/3 | 115 | 1.8/1.6/1.4 | 60 | 1 | 3 | 6600/4800/ 3800 |
60/52 | 1570/1400/ 1000 |
DD | 3-Painted |
| VPC24 | 24" | 1/2 | 115 | 4.8 | 50/60 | 1 | 1 | 8500 | 62 | 1725 | DD | 3-Alum |
| VPC24-POWOSC | 24" | 1/3 | 115 | 2.8/2.4/1.9 | 60 | 1 | 3 | 7200/6200/ 5200 |
62/54 | 1100/900/ 700 |
DD | 3-Painted |
| VPC30-POWOSC | 30" | 1/3 | 115 | 2.8/2.4/1.9 | 60 | 1 | 3 | 8200/7200/ 6200 |
62/54 | 1100/900/ 700 |
DD | 3-Painted |
DD - Direct Drive, POW - UL507 Certified Indoor/Outdoor, OSC - Oscillating
| Model No. | Size | Tank Size | Tank Res. Hours | # of Nozzles | Nozzles GPH | Pump Amps | Fold Down | Plug-In |
|---|---|---|---|---|---|---|---|---|
| VPC18-POW | 18" | 22 Gal | 5-8 | 3 | 0.5 | 0.06 | Yes | GCFI |
| VPC24 | 24" | 22 Gal | 5-8 | 4 | 0.5 | 0.06 | Yes | GCFI |
| VPC24-POWOSC | 24" | 22 Gal | 5-8 | 4 | 0.5 | 0.06 | Yes | GCFI |
| VPC30-POWOSC | 30" | 22 Gal | 5-8 | 4 | 0.5 | 0.06 | Yes | GCFI |
GCFI - Ground Fault Interrupter, POW - UL507 Certified Indoor/Outdoor, OSC - Oscillating
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.1 ★★★★★
Based on 17 reviews
Sort
Product Reviews
★★★★★ 5
Price / Quality - Office Desk - Perfect
Size: H Desk Unfinished 3/4-in and 1/2-in
Purchased two sets to create a custom L shaped desk for the office. Placed a pine stained top. Perfect to handle a monitor, multiple laptops, normal office equipment. Extra benefit is the cross piece at the bottom as a foot rest. Very sturdy while sitting on carpet. Compared to normal pipe material purchased in large box store -- could not have asked for a better product for the price. Looking at other products for additional projects for around the house for the product and vendor. - Highly Recommend.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 27, 2021
★★★★★ 4
Fantastic style, good stability, customizable finish, and great customer service
Size: M Desk Unfinished 3/4-in and 1/2-in
Put this together in about April 2020 right about the crazy lockdown/quarantine/work-from-home timeframe. I knew that I wanted a simple hardwood desk with no drawers or stuff below the top. I have an ergonomic keyboard tray that I have attached to all my work desks for many years now, and it was too long for my old home desk, which was also made of MDF and was falling apart. Boo.
Enter this kit plus a butcher block top from the big box store. This kit went together easily. I had lost the instructions but a quick email to the JS Supplies company, and they hooked me up. By the time they sent it, I had actually figured out the part that was puzzling, which was what the all-thread pieces were for (the couplers between the elbows and the flanges on the top side).
I degreased all the parts with a simple Simple Green-type solution diluted in a 5 gallon bucket. I then sprayed the pieces with a satin nitrocellulose laqcuer (Minwax brand that I got from the home improvement big box). Worked great. I thought about doing a sealed rust finish using a science project volcano--vinegar and baking soda for a quick layer of rust on the outside--but I decided against it, as I wasn't sure of how stable the final product would be, even after a clear spray finish. The satin nitro finish looks great without even looking like a finish. I also coated the pieces with paste wax after the finish dried, just for good measure.
The one thing that is a bit disappointing is the stability... WITH MY TOP, mind you.I should be clear that the top that I'm using is a 1-3/4" thick monster piece of birch butcher block that is 60" x 30". I'm guessing that it's 40-50 pounds? Maybe more. This is probably WAY more weight than this leg set is made for. I also have the aforementioned keyboard tray that sticks out (torque equals force times lever arm) and causes even more torque. I get some shaking with the top with this setup. I have the desk on carpet; I was concerned that maybe the carpet and pad were not giving enough stability with the feet, so I made some plywood platforms for the feet. I also carefully leveled the feet to make sure it wasn't just uneven legs that was causing the instability. Still shakes no matter what I tried.
I think it's just that I have such a heavy top--more than this thing is spec'd for. That's totally fine, and I don't want to knock off a bunch of stars for that. I leave these comments more as a "don't do what I did" thing. Just be advised that you need to limit the weight of the top to something reasonable.
The design of one upright on each side of the desk with a pipe coupler in between is probably the weak spot with my heavy desktop; I'm thinking of either adding tension on either side (with some threaded rod and turnbuckles) or some extra supports with something like the Steel-Tek pieces from Lowe's.
Overall, I'm very satisfied with the product and the company!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 23, 2020
★★★★★ 5
So nice I bought twice!
Size: H Desk Unfinished 3/4-in and 1/2-in, Size: H Desk Unfinished 3/4-in and 1/2-in
For starters, this is a great buy if it is exactly what you want. For me that was the case and it would have cost me a good $40 or more to replicate it at a big box store. With that said, if you are not planning on using all of the pieces and want a different configuration, this may not be the kit for you. All of the parts inside are just like if you bought it at a local home improvement store. All the pipes need to be cleaned and protected. I personally found that dish soap (dry off immediately after you clean a piece) was the easiest to clean everything and I finished it with some wax. The kit is sturdy and easily supports the weight of my butcher block tops. I inverted the kit as it is designed as I intend on adding a shelf and am planning on using the support brace to aid in holding that shelf up for cable management. After cleaning and protecting, putting the kit together only took 5-10 minutes and that was with kid disruptions. I purchased 2 so that my wife and I could have matching desks in the office and I couldn't be happier.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 23, 2019
★★★★★ 5
Durable and sturdy. I bought two
Size: H Desk Unfinished 3/4-in and 1/2-in
Love the kit. I ordered two to make an L-shaped desk for my home office. Perfect height, looks cool, and sturdy. Slightly tricky to get two of them to the exact same height but you can adjust them buy loosing/tightning parts. Way cheaper than going to the hardware store and buying the same parts. I wiped each piece down as they are a bit dirty/greasy, but no big deal.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 9, 2021
★★★★★ 5
Great legs - sturdy when fully assembled with tabletop.
Size: H Desk Unfinished 3/4-in and 1/2-in
These legs are great. I put it together with a butcher block tabletop and it turned out beautifully. I recommend using a level on the legs once you get them into position and again when you place a top on it. The screws included were so easy to screw into the block but that will vary depending on the top you select. Watch the videos another reviewer posted on cleaning the legs with a mild soapy water and dry them thoroughly. It really helped me. Also after it was all assembled I used a clear acrylic - in a spray can to clear coat and seal the legs. I am really happy with it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 4, 2020
recommand products
KYLIX GLOSS BAG BLACK
700.00
TESA PANTS
170.00
SUPERPRO REAR TRAILING ARM LOWER BUSH KIT TO SUIT NISSAN SAFARI Y61 ZD30DDTI TURBO DIESEL 3.0L I4
85.00
Mango-2 Men'S Graphic Tee, 100% Cotton, Comfortable Casual Summer Wear, Machine Washable, Mango Fruit, Sliced Mango, Yellow Fruit, Tropical Flavors, Juicy Texture, Fruit Arrangement, Geometric Shapes, Fresh Produce, Healthy Snack Bac129
23.00
Wakanda Velveteen Plush Blanket (Daughter from Dad)
59.99