SKU: 15306154030

8M0088080 Gearcase Seal Kit for Mercury EFI | JLM Marine

Sale price$51.26 Regular price$56.95
Save 10%

Pay in installments of $14.24 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 27 - Aug 1

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

8M0088080 Gearcase Seal Kit for Mercury EFI | JLM Marine8M0088080 Gearcase Seal Kit for Mercury EFI Outboards This gearcase seal kit is engineered to fit Mercury EFI outboard motors ranging from 65HP to 115HP, including standard, Sea Pro, Pro XS, and JET configurations. Designed for 2. 07: 1 standard rotation gear housings with serial numbers 2B095049 & Up (and 2B225488 & Up for 115HP Pro XS models), this kit provides essential sealing components for both driveshaft and propeller shaft maintenance. The kit

8M0088080 Gearcase Seal Kit for Mercury EFI Outboards

This gearcase seal kit is engineered to fit Mercury EFI outboard motors ranging from 65HP to 115HP, including standard, Sea Pro, Pro XS, and JET configurations. Designed for 2.07:1 standard rotation gear housings with serial numbers 2B095049 & Up (and 2B225488 & Up for 115HP Pro XS models), this kit provides essential sealing components for both driveshaft and propeller shaft maintenance.

The kit directly replaces Mercury OEM part number 8M0088080, ensuring proper fitment across multiple Mercury EFI model families. It is suitable for both gear housing driveshaft and propeller shaft seal service on compatible engines.

  • Fits Mercury EFI outboards: 65HP, 75HP, 80HP, 90HP, 100HP, and 115HP models
  • Compatible with standard rotation 2.07:1 gear housings
  • Designed for driveshaft and propeller shaft seal replacement

Part Number Cross-Reference

Use this table to confirm equivalent part numbers across OEM and aftermarket brands.

Brand Part Number
Mercury 8M0088080

Compatible Engine Models

Confirm your engine model/year in the table below. For Mercury owners, here's a guide to help you identify your engine's serial/model: Mercury Serial Number Guide. You can also review exploded diagrams to verify part numbers: Mercury Parts Diagrams & Catalog.

Brand Model Rated HP Serial Number Range Component Gear Ratio
Mercury Outboard EFI 100HP 2B095049 & Up Gear Housing, Driveshaft 2.07:1 Standard Rotation
Mercury Outboard EFI 90HP 2B095049 & Up Gear Housing, Driveshaft 2.07:1 Standard Rotation
Mercury Outboard EFI Sea Pro 75HP 2B095049 & Up Gear Housing, Driveshaft 2.07:1 Standard Rotation
Mercury Outboard EFI JET 65HP 2B095049 & Up Gear Housing, Driveshaft 2.07:1 Standard Rotation
Mercury Outboard EFI Pro XS 115HP 2B225488 & Up Gear Housing, Driveshaft 2.07:1 Standard Rotation
Mercury Outboard EFI 80HP 2B095049 & Up Gear Housing, Driveshaft 2.07:1 Standard Rotation
Mercury Outboard EFI JET 80HP 2B095049 & Up Gear Housing, Driveshaft 2.07:1 Standard Rotation
Mercury Outboard EFI Sea Pro 115HP 2B095049 & Up Gear Housing, Driveshaft 2.07:1 Standard Rotation
Mercury Outboard EFI Sea Pro 90HP 2B095049 & Up Gear Housing, Driveshaft 2.07:1 Standard Rotation
Mercury Outboard EFI 115HP 2B095049 & Up Gear Housing, Driveshaft 2.07:1 Standard Rotation
Mercury Outboard EFI 75HP 2B095049 & Up Gear Housing, Driveshaft 2.07:1 Standard Rotation
Mercury Outboard EFI 90HP 2B095049 & Up Gear Housing, Propeller Shaft 2.07:1 Standard Rotation
Mercury Outboard EFI Sea Pro 75HP 2B095049 & Up Gear Housing, Propeller Shaft 2.07:1 Standard Rotation
Mercury Outboard EFI 100HP 2B095049 & Up Gear Housing, Propeller Shaft 2.07:1 Standard Rotation
Mercury Outboard EFI JET 65HP 2B095049 & Up Gear Housing, Propeller Shaft 2.07:1 Standard Rotation
Mercury Outboard EFI 80HP 2B095049 & Up Gear Housing, Propeller Shaft 2.07:1 Standard Rotation
Mercury Outboard EFI Pro XS 115HP 2B225488 & Up Gear Housing, Propeller Shaft 2.07:1 Standard Rotation
Mercury Outboard EFI Sea Pro 90HP 2B095049 & Up Gear Housing, Propeller Shaft 2.07:1 Standard Rotation
Mercury Outboard EFI JET 80HP 2B095049 & Up Gear Housing, Propeller Shaft 2.07:1 Standard Rotation
Mercury Outboard EFI Sea Pro 115HP 2B095049 & Up Gear Housing, Propeller Shaft 2.07:1 Standard Rotation
Mercury Outboard EFI 115HP 2B095049 & Up Gear Housing, Propeller Shaft 2.07:1 Standard Rotation
Mercury Outboard EFI 75HP 2B095049 & Up Gear Housing, Propeller Shaft 2.07:1 Standard Rotation

Technical Specifications

Specification Value
OEM Part Number 8M0088080
Brand Compatibility Mercury
Engine Type EFI Outboards (65HP–115HP)
Gear Ratio 2.07:1 Standard Rotation
Application Gear Housing Driveshaft & Propeller Shaft Seals

Package Contents

This gearcase seal kit includes all necessary seals and components for servicing your Mercury EFI outboard's gear housing. Please verify the individual seals and gaskets against your service manual or exploded diagram to ensure complete compatibility with your specific model and serial number.

Installation Guide

  1. Disconnect the battery and remove the outboard's lower unit following your service manual instructions. Drain all gearcase oil completely.
  2. Clean the mating surfaces of the gear housing thoroughly, removing old sealant and debris to ensure proper seal seating.
  3. Remove the old driveshaft and propeller shaft seals using appropriate seal removal tools; take care not to damage housing surfaces.
  4. Inspect the gear housing for cracks, corrosion, or scoring that may compromise new seal performance.
  5. Lubricate new seals with marine-grade grease and carefully install them into their respective bores using proper seal drivers.
  6. Ensure each seal is seated evenly and at the correct depth as specified in your service manual.
  7. Reinstall the driveshaft and propeller shaft, verifying smooth rotation and correct alignment.
  8. Reassemble the lower unit to the gear housing using new gaskets and appropriate marine sealant where specified.
  9. Refill the gearcase with the manufacturer's recommended gear oil to the proper level; check for leaks.
  10. Reinstall the lower unit onto the outboard motor, torquing all fasteners to specification.
  11. Run the engine in a test tank or on the water, then recheck gearcase oil level and inspect for leaks after initial operation.

Troubleshooting & FAQ

Q: How do I confirm this seal kit fits my specific Mercury outboard?
A: Cross-reference your engine's serial number with the compatibility table above. Your serial number should be 2B095049 or higher (or 2B225488 & Up for 115HP Pro XS). Additionally, verify your gear housing is the 2.07:1 standard rotation type by checking your owner's manual or the gear housing identification tag.

Q: What are the signs that my gearcase seals need replacement?
A: Common symptoms include gear oil leaking from the lower unit, milky or contaminated gear oil (indicating water intrusion), difficulty shifting gears, or unusual noise from the lower unit. Regular inspection during oil changes is recommended.

Q: How often should I replace gearcase seals?
A: Gearcase seals should be inspected annually and replaced as needed based on condition. Typical replacement intervals range from 2–5 years depending on usage, operating conditions, and maintenance practices. Always replace seals during lower unit overhauls or if any seal damage is detected.

Q: Can I install this kit myself or do I need a professional?
A: Installation requires mechanical aptitude, specialized tools (seal drivers, torque wrench), and familiarity with lower unit disassembly. If you lack experience with outboard lower unit service, professional installation is strongly recommended to avoid costly damage.

Q: Does this kit include all seals needed for a complete lower unit rebuild?
A: This kit contains gearcase seals for the driveshaft and propeller shaft assemblies. Verify contents against your service manual's parts diagram, as additional gaskets, O-rings, or bearings may be required depending on the scope of your service.

Q: Is this an OEM or aftermarket seal kit?
A: This listing is an aftermarket replacement part (not an OEM component). We build to OEM specifications using comparable-grade materials. Production is done in an ISO9002-certified facility, and each batch is inspected for consistent performance.

Q: How fast do you ship and how much does it cost?
A: We offer fast global shipping—typically 5–15 days worldwide—and standard shipping is free. Expedited options are available at checkout depending on your location.

Q: What is your warranty and return policy?
A: This product includes a 1-year warranty against manufacturing defects under normal use. If something goes wrong, contact our support team with your order details. Returns are accepted within our standard return window (unused & in original condition); please see our policy page or reach out for instructions.

Important Notes

  • Verify that the product images and specifications match your original part. If discrepancies exist—even if your model is listed—do not proceed with the purchase.
  • This product is an aftermarket replacement part and is not an OEM component.
  • Professional installation is recommended to ensure safety and optimal performance.

Why Choose JLM MARINE?

  • Quality Assured: As a trusted manufacturer for over 20 years, we supply top marine brands globally.
  • Fast Global Shipping: Free delivery worldwide in 5–15 days.
  • Direct from Manufacturer: Competitive pricing without compromising quality.
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 15306154030

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.4 ★★★★★
Based on 7 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
T
Verified Purchase
Terry Anne
Lexington, US
★★★★★ 3
Only holds towels in place when it is full or 1/2 full
Color: 01-silver
If you are buying this for the feature of holding the paper towels in place so you can just rip one, I think you will be disappointed. Once the roll becomes smaller (and I tried changing the arm) the arm does not touch the towels. I do like the firm grip on the counter. My other dissatisfaction is the base gets water spots. Being near the sink this happens frequently. It does its job and is attractive.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 21, 2026
J
Verified Purchase
Jay
San Leandro, US
★★★★★ 5
Stylish
Color: 01-silver
Good sturdy stand for paper towels. Has small suction cups on bottom for stability. Good finish and good fit under the counter. Heavy base and not flimsy feeling. Brushed aluminum matched other appliances well.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 6, 2026
T
Verified Purchase
The product comes in multiple colors, but the function is terrible
Port Orchard, US
★★★★★ 5
Goodbye for the value
Color: 02-black
Great value looks wonderful very adorable
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 31, 2026
M
Verified Purchase
Marc
Omaha, US
★★★★★ 5
Excellent Paper Towel Holder!!
Color: Black
Sleek design!! Inexpensive and does the job. Easy installation and handles all size home paper towels!! Very Sturdy!!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 17, 2026
D
Verified Purchase
Dexidus
Draper, US
★★★★★ 5
Great item
Color: Black
Easy to put together looks stylish and simple. Works as expected
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 30, 2026

recommand products