Pay in installments of $44.00 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 13 - Aug 18
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
STAGE 1 PERFORMANCE UPGRADE TO SUIT HOLDEN COMMODORE VF ALLOYTEC SIDI LWR LFW LFX 3.0L 3.6L V6This Mace ETC and K&N's air filter have been put together to meet the performance upgrade requirements of Holden vehicles fitted with the V6 engines. Mace ETC eliminates the delay that exists between the throttle pedal and the butterfly in the throttle body, re establishing throttle response and bottom end acceleration while improving low torque. There are different performance modes in this ETC that helps you to increase throttle response and improve
This Mace ETC and K&N's air filter have been put together to meet the performance upgrade requirements of Holden vehicles fitted with the V6 engines.
Mace ETC eliminates the delay that exists between the throttle pedal and the butterfly in the throttle body, re-establishing throttle response and bottom-end acceleration while improving low torque. There are different performance modes in this ETC that helps you to increase throttle response and improve overall drivability.
The K&N replacement air filter is designed to boost the horsepower and acceleration while providing superior filtration. It is washable and reusable and is custom designed to fit into your existing factory air box. This filter lasts up to 80,000km before cleaning is required depending upon driving conditions. It comes with K&N million mile limited warranty and it will not void vehicle warranty.
Modes of ETC:
- Sport Mode: 9 stages of increased accelerator response suited for spirited driving.
- Economy Mode: Reduced accelerator response suited for economy driving around towns and on highways.
- Normal Mode: Factory throttle response.
ETC Features:
- OBD.II free, meaning power is sourced directly from the pedal and additional plugs are no longer required.
- Temperature ranges from -40 to 125 °C.
- Previously set stage numbers are retained thanks to Power off memory function.
- Digital signal output AD/DA up to 10 Bit, efficiently responds to the original throttle signal.
Air Filter Specifications:
- Air filter shape: Panel
- Outside length: 13 in (330 mm)
- Outside width: 9.5 in (241 mm)
- Height: 0.875 in (22 mm)
Contents:
- 1 X Mace ETC
- 1 X K&N Air filter
Vehicle Fitment Guide
Notes:
- Installation of the Mace ETC is quite simple and the modification is completely reversible within a couple of minutes. All kits include simple fitting and calibration instructions.
- The air filter included in this package can be purchased separately through another listing.
- The ETC included in this package can be purchased separately through another listing.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.6 ★★★★★
Based on 25 reviews
Sort
Product Reviews
★★★★★ 5
Top quality
Model: SLH20025
This Siless Hybrid 3-in-1 sound deadening mat is easy to work with and feels high-quality. The butyl material is thick and pliable, making it simple to cut and fit into doors, floors, or panels.
After installation, road noise and vibrations are noticeably reduced, and it also seems to improve the overall cabin feel. No bad smell.
At 25 sq ft per roll, it’s a good value for anyone looking to dampen noise and improve car acoustics. Overall, a solid, effective option for automotive soundproofing. Used on a Fiesta ST.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 15, 2026
★★★★★ 5
Made a big improvement in cabin noise—highly recommend
Model: SLH20025
Siless Hybrid made a huge difference in reducing noise in the floor of my truck cabin. In some areas, there was basically just bare sheet metal between the inside and outside, so adding this really helped the truck feel more solid and noticeably quieter on the road.
I used Kilmat on the doors, and honestly I wish I had used Siless Hybrid there too, but it was too late by the time I realized the difference. This material is very sticky, easy to cut, and simple to apply, which made the install pretty smooth.
Just a heads-up: the tacky side gets messy and will bond to clothing really easily, so be careful during installation. Overall, I’d definitely buy it again—great product with real results.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 2, 2025
★★★★★ 5
Very good product at a fair price
Model: SLH20025
Very good sound deadener and heat shield, it is a bit sticky to work with, but easy to shape and cut
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 19, 2026
★★★★★ 5
I wish I had Siless 20 years ago!!!
Model: SLH20025, Model: SLH20025
I have installed all kinds of insulation in vehicles over many years. I only needed to purchase 2 boxes to complete the entire interior siding of my 2025 chevy express, what a great value! I wanted to insulate my locksmith van for sound and heat. The sound reduction virtually eliminated the road noise. These panels also look amazing. It got up to 110F in the sun with the doors closed. After adding Siless insulation the temperature maxed out at 97F. That is a massive difference. Plus, I didn't even finish with the roof before testing. Siless Hybrid 3in1 was extremely easy to cut and adhere onto metal panels. I'm impressed with the quality of the individual panels and the adhesive is not toxic smelling compared to some others. My favorite thing about these panels is you can actually take them off and readjust them before they finally stick and they do not leave any black residue behind when you pull them up to adjust them. All I needed was a heat gun, knife and a roller to complete this job. The size of each panel is perfect, you can handle them with ease. I probably won't need your product again for a while, but when I do I will definitely be back.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 21, 2025
★★★★★ 5
Works well and is easy to install.
Model: SLH20025, Model: SLH20025
I was sound and heat insulating a generator bay in my class A RV so I did three tests before and during material application: I did a sound level test to see how effective the material was for my application, a "stickiness" test, and a flammability test. This was indoors on a dry 78°F day. From beginning to end, the entire process, including testing, took 5 hours to install 25 sqft or material in a very complex area. One hour for cleaning, 3 hours for installation, and 1 hour for test setup and testing.
Using a sound meter, I took before and after readings and determined that I reduced the sound level by 2.2 db (40% energy decrease) with a noticeable decrease in sound and frequency. The generator bay is located under the master bedroom in the aft portion of the coach. The sound went from a rattling, vibrating generator noise to a more tolerable low level rumble.
The material was easy to apply. I did some testing prior to application and determined that surface preparation is key. I cleaned my painted metal surface and then degreased with acetone and the material stuck well. Be careful and purposeful when you apply the material because once it was stuck to the metal, it was quite difficult to remove or reposition.
Since it was going to be installed into a gasoline powered generator bay located under our sleeping quarters, I did some flame testing to determine the level of risk. Although not highly flammable after installation, my testing revealed that the PE used will catch on fire under certain circumstances. In order to reduce the risk, I used aluminized duct tape to ensure that all the edges were sealed and the PE was not exposed to direct flame in the event of a fire. I also decided to install an automatic fire extinguisher as an added precaution. In all fairness there should be one installed in the generator bay anyway.
All in all, I am very satisfied with the product and the results. I have recommended this product to my other RV owner friends.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 13, 2025
recommand products
Sterling Silver Rhodium-plated Personalized 2-piece Peace Dogtag Charm
61.00
3D MAXpider 2008-2010 Dodge Challenger Kagu Cargo Liner - Gray M1DG0011301
130.74
Sterling Silver Rhod-plated Initial L Personalized with Birthstone Charm
31.00
3D MAXpider 2009-2010 Ford F-150 Regular/Supercab/Supercrew Kagu 1st Row Floormat - Black L1FR06711509
131.94
HPS Black Reinforced Silicone Radiator Hose Kit KTM 11-13 125SX 150SX
96.14