Pay in installments of $48.98 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 5 - Aug 10
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
panca fondo letto con contenitore in tessuto e gambe in acciaio 100x40x49cm crema 297507Panca Panca Fondo Letto con Contenitore in Tessuto e Gambe in Acciaio 100x40x49cm Crema Aggiungi spazio e comodit alla tua casa con la panca fondoletto . Il design elegante la rende perfetta da abbinare a diversi stili di arredamento, in camera da letto, ingresso o salotto. Dotata di un pratico contenitore nascosto, questa panca imbottita ti aiuta a tenere in ordine e creare un comodo posto per sedere. Realizzata con solide gambe in metallo e piedini
Panca
Panca Fondo Letto con Contenitore in Tessuto e Gambe in Acciaio 100x40x49cm Crema
Aggiungi spazio e comodità alla tua casa con la panca fondoletto . Il design elegante la rende perfetta da abbinare a diversi stili di arredamento, in camera da letto, ingresso o salotto. Dotata di un pratico contenitore nascosto, questa panca imbottita ti aiuta a tenere in ordine e creare un comodo posto per sedere. Realizzata con solide gambe in metallo e piedini regolabili, la panca resiste al peso e resta stabile.
Specifiche Tecniche
- Ideale da usare come panca fondoletto (per letto singolo), panca da ingresso o nel salotto
- Contenitore nascosto per riporre coperte, cuscini, ecc.
- Design elegante perfetto da abbinare diversi stili di arredamento
- Imbottitura spessa in schiuma con rivestimento in tessuto traspirante, per una seduta confortevole
- Panca contenitore con gambe solide in acciaio
- Piedini regolabili per mantenere la stabilità
- Montaggio richiesto
Caratteristiche Tecniche
- Colore: Crema
- Materiali: Poliestere, Acciaio
- Dimensioni complessive: 100L x 40P x 49A cm
- Dimensioni del vano contenitore: 92L x 32P x 12.5A cm
- Spessore della seduta: 21 cm
- Altezza gambe: 28 cm
- Capacità di peso: 120 kg
Contenuto della Confezione
- 1 x Panca contenitore da ingresso
- 1 x Manuale
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.6 ★★★★★
Based on 29 reviews
Sort
Product Reviews
★★★★★ 5
Works well. You need to drill a 3/8” hole
Appears to be well made, alignment bar slides in nicely. As stated, you need to drill a hole in the bar for the gimble bearing driver, the directions are not clear, what I did was before I take out the old gimble bearing, put an O ring on the bar close to the last step on the bar, slide the bar all the way in, then carefully slide the bar out, this marks the distance from the back of the gimble bearing to where the shaft on the outdrive bottoms out, move the O ring a 1/4” towards the stepped part of the alignment tool (this is so you won’t bottom out the alignment tool when driving the gimble bearing in) then slide the driver puck up to the O ring and use a 3/8” diameter transfer punch through the side hole in the puck to mark the bar. You need to drill a 3/8” diameter hole in the alignment bar, two V blocks, some clamps, and a drill press will make drilling much easier, after the bar is securely mounted and centered in the drill press, use a center drill, then 1/4” drill first, using plenty of oil, drill all the way through, then use the 3/8” drill, deburr both sides and you should be good to go. People complain that it doesn’t come pre-drilled, the reason is that not all out drives are the same so you have to fit it to the outdrive that you have. Fortunately, I have a machine shop at my house and have a jig setup with various drill bushings, but the method I described above should work for you. Just make sure you’re perfectly centered and secure before you start drilling.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 16, 2026
★★★★★ 5
A must pull your gimbal bearing
You do need to drill a hole but worked perfect
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 26, 2025
★★★★★ 5
Worked for Volvo Penta SX Gimbal Bearing
Very heavy tool, I was surprised. Pulled my bearing like it was nothing. Putting the new bearing in was a little more difficult as you have to drill a hole in the engine alignment shaft where it will work for your particular outdrive. Not hard, but it does not come pre-drilled as the required depth for each particular gimbal bearing differs by manufacturer and model. Measure your bearing placement before removal and check that it was installed correctly in the first place. The bearing should line up with the grease fitting and the o-rings on the drive shaft should end up riding in the middle of the bearing. once you have your measurement drill the hole, I used a drill press. I suppose you could use it on multiple outdrive models as long as you can drill more holes.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 5, 2023
★★★★★ 5
Great value
This kit worked perfectly on my Alpha one mercury outdrive. I saw a lot of people mention that it was a hassle to drill the hole when you better have all this alignment stuff. I threw it in use my regular drill drill guide and then the second hole was lined up. Pulling Gimble be very easy. I did have to adjust it up at an angle because my bearing was sitting in their crooked and it came out the second time I made the adjustment to the angle. I would highly recommend this.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 16, 2024
★★★★★ 1
Unfinished product - doesn't work - waste of money
in order to use this as an installation tool the directions tell you to drill a hole through the 2 inch steel rod..... either this hole should already be drilled, or this should not be advertised as an installation tool..... it will not install any bearings without extensive modification and requires the use of a drill press or a lathe. very dissatisfied that I now have to buy ANOTHER tool just to finish this job because this one doesn't do what it's described to do.... piece of junk... typical amazon garbage.... this is why I haven't used amazon in over a year... they rip you off with garbage.... I should have known better .... don't buy this junk .... Now they say 20 -30 days to get my refund .... Don't waste your time
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 26, 2026
recommand products
Speiseteller uni petrol Ø 29 cm | Meissen No.41 Casa
159.00
MARTIDERM AMATIST day cream 50 ml
41.63
Dose "Kolibris im Blütenstrauch", Lim. 50, H 13,5 cm | Meissen Limited Edition
2995.00
Speiseteller, petrol, Goldrand, Ø 29 cm | Meissen No.41 Urban Colours
179.00
Speiseteller, Ming-Drache, rot, handausgemalt, Ø 28 cm | Meissen Neuer Ausschnitt
209.50