SKU: 57810063838

Makita DUC 122 RTE Akku Kettensäge 18V 1/4" 115mm + 2x Akku 5,0Ah + Ladegerät + Koffer

$188.35 $209.28
Save 10%
No.2 Bestseller on salfueradeti.es >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 14 - Jul 19

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Makita DUC 122 RTE Akku Kettensäge 18V 1/4" 115mm + 2x Akku 5,0Ah + Ladegerät + KofferLieferumfang: 1x Makita DUC 122 Z 18 V Li Ion Akku Kettensge 1x Sgekettenl 100ml 1x Kettenrundfeile 4,0mm 1x Makita Koffer fr DUC 122 2x Makita BL 1850 B Li Ion Akku 18V 5,0 Ah 1x Makita DC 18 RC 9,6 18 V Akku Schnell Ladegert fr Li Ion Akku Produktbeschreibung: Die handliche Akku Kettensge DUR 122 von Makita berzeugt mit kraftvollem Motor fr hohe Kettengeschwindigkeit und kompaktem Gehuse, wodurch das Arbeiten an schwer zugnglichen Orten erleichtert

Lieferumfang:

- 1x Makita DUC 122 Z 18 V Li-Ion Akku Kettensäge
- 1x Sägekettenöl 100ml
- 1x Kettenrundfeile 4,0mm
- 1x Makita Koffer für DUC 122
- 2x Makita BL 1850 B Li-Ion Akku 18V 5,0 Ah
- 1x Makita DC 18 RC 9,6 - 18 V Akku Schnell Ladegerät für Li-Ion Akku

Produktbeschreibung:

Die handliche Akku Kettensäge DUR 122 von Makita überzeugt mit kraftvollem Motor für hohe Kettengeschwindigkeit und kompaktem Gehäuse, wodurch das Arbeiten an schwer zugänglichen Orten erleichtert wird. Die Säge verfügt über automatische Kettenschmierung, die Sicherheit wird durch eine Motorbremse gewährleistet, ein Sägekettenstopp erfolgt innerhalb von 0,5 Sekunden. Das Handling wird durch die im Handgriff eingelegten Gummipolster maximiert, das Einstellen der Kettenspannung und der Sägekettenwechsel erfolgen werkzeuglos.

Top-Handle Kettensäge - nur zugelassen für gewerbliche Anwender mit Spezialausbildung!

Technische Daten:

Makita DUC 122 Z 18 V Li-Ion Akku Kettensäge
Akkuspannung: 18 V
Gewicht: 2,6 kg
Kettengeschwindigkeit: 300 m/min
Schnittlänge: 115 mm
Sägekettenteilung: 1/4"
Öltank: 80 ml

Makita Koffer für DUC 122
Herstellernummer: 141494-1
Material: Kunststoff
Geeignet für: DUC 122

Makita BL 1850 B Li-Ion Akku 18V 5,0 Ah
Akkukapazität: 5,0 Ah
Akkuspannung: 18 V
Gewicht Akku: 630 g

Makita DC 18 RC 9,6 - 18 V Akku Schnell Ladegerät für Li-Ion Akku
Herstellernummer: 195584-2
Ladezeiten: 1,5 Ah - 18 Volt: 15 Min.
3,0 Ah - 18 Volt: 22 Min.
4,0 Ah - 18 Volt: 36 Min.
5,0 Ah - 18 Volt: 45 Min.
Eingang: 230 V
V Max.: 9,6 - 18 V
Ah Max.: 5,0 Ah
Gewicht: 900 g
Ladestrom: 9Ah


Bei gewerblicher Nutzung beachten Sie bitte die Bauvorschriften!

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 57810063838

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.4 ★★★★★
Based on 193 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
T
Verified Purchase
Tharin
Bozeman, US
★★★★★ 5
BUY THIS ONE!
Model: NewSLS50_52
This is one of the good ones. There are other brands just as good, and manny brands are worse, but this handles well, rolls down easily, doesn't come off at all easily, and adapts to dips and curves like a champ. Appropriately heavy and dead, I'm happy with the way it smothers panel resonances and even at muffling direct sound, like a big hand over my Uncle Harry's eternally noisy mouth. You can rip the foil but you have to work hard at doing that. Remember to buy a brayer; you can roll overlaps nice and thin. Also remember to pre-wipe the sheet metal with a decent solvent like acetone or Stoddard/Varsol. It should last forever.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 26, 2025
H
Verified Purchase
Harvey
Dallas, US
★★★★★ 5
Good stuff, but watch the temp
Model: NewSLS50_52
I used this in my single cab pickup truck (89 ford.) It only took half the box (10 sheets or 25 square feet) to do the floors, but I bought the big box because I plan to do the doors, back wall, and maybe the roof as well. One thing I learned is that the temperature matters when you’re doing the installation. It was around 55F when I started in the evening, and when it dipped down into the 40s the sheets would not stick to the metal, and were hard to compress with the roller. That’s why I ended up only doing the floors and not any vertical surfaces; i will have to wait for a nice hot day. The other thing is that the foil layer on top is razor sharp at the edges, definitely wear gloves! I didn’t notice until after but I have little papercuts all over my fingers. Aside from those things, the install was easy and straightforward. The sheets cut easily with scissors, and any goo that ends up on your hands or scissors can be cleaned up with acetone (nail polish remover), or lacquer thinner. I would use this stuff again.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 16, 2023
L
Verified Purchase
Lyrah
Phoenix, US
★★★★★ 5
Very efficient!
Model: NewSLS50_52
Amazing the difference it makes on dumping the noise. Very easy to install. Pell and stick literally! Great!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 23, 2025
A
Verified Purchase
Alexis
Boise, US
★★★★★ 5
Supports DP Alt + Power Delivery from one source
This is one of the very, very few USB-C hubs out there that successfully pushes DisplayPort Alt and 100w PD functionality from one source cable to one device. My monitor has a USB-C DP alt port that also pushes 95w PD and this hub successfully pushes both of those to my laptop, phone, and android handheld console. The marketing material says something about USB PD cannot work with DP alt, but it seems to be working fine for me so who knows. With this little hub in-between the link from the monitor to the device, I can now add a USB ethernet adapter and game controller, and I only ever have to plug one USB-C cable into my device (and I am using a USB4 extension cable with no issues as well) and it all works perfectly!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 21, 2026
M
Verified Purchase
Mark N.
Whiting, US
★★★★★ 5
Supports Reverse Charging a Laptop on Monitors with USB-C PD!
This adapter is unique in that it supports reverse charging + video on the same port. I use this with an LG monitor (60W PD) and an M1 Pro Mac. At first, I had connectivity issues: hub was disconnecting and reconnecting every few seconds. I followed advice to update the firmware on the hub, but that didn't solve the issue. Turns out, my monitor also needed a firmware update. Once I updated the monitor firmware, it stabilized and has been working great ever since.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 4, 2025

recommand products

Restaurant über dem Meer - CALVENDO Foto-Puzzle'
33.99
SALZBURG Blick vom Mönchsberg - CALVENDO Foto-Puzzle'
33.99
T2 - CALVENDO Foto-Puzzle'
33.99
Bergkristall - CALVENDO Foto-Puzzle'
33.99
Schau mir in die Augen... - CALVENDO Foto-Puzzle'
33.99