flange drive wheel keyway steel s355 wheel 300 mm flange 345 mm

flange drive wheel keyway steel s355 wheel 300 mm flange 345 mmFlanged Drive Wheel with Keyway PU or Vulkollan Tread on S355 Steel Core Flange 345 mm Tread 300 mm Lathed flanged drive wheel with keyway according to DIN 6885 and cast elastomer tread. The keyway accommodates a feather key for positive torque transmission to the drive shaft. The S355 steel core carries the load, while the PU or Vulkollan tread absorbs shocks. Tread Selection Polyurethane MDI High quality MDI polyurethane, abrasion resistant, oil

Flanged Drive Wheel with Keyway | PU or Vulkollan® Tread on S355 Steel Core | Flange Ø 345 mm | Tread Ø 300 mm

Lathed flanged drive wheel with keyway according to DIN 6885 and cast elastomer tread. The keyway accommodates a feather key for positive torque transmission to the drive shaft. The S355 steel core carries the load, while the PU or Vulkollan® tread absorbs shocks.

Tread — Selection

Polyurethane MDI — High-quality MDI polyurethane, abrasion-resistant, oil-resistant, and with good damping. Economical choice for medium to high loads. Hardness approx. 92 Shore A. Temperature -20°C to +80°C.

Vulkollan® — Premium elastomer from Covestro, highest load capacity with elastic running, extremely abrasion-resistant, capable of continuous loading. Hardness approx. 92 Shore A. Temperature -20°C to +80°C.

Core Material: Steel S355 (bright)

Structural steel S355 with a minimum yield strength of 355 N/mm², good workability, high strength. Standard material for driven industrial wheels.

Typical Applications

Driven flanged wheels for AGVs, AGV drives, gantry cranes, trolleys, motor-driven chassis, and all applications with positive shaft connections.

Customization Note

These wheels are manufactured to order. Delivery time upon request. Special diameters, different axle bore tolerances, hub lengths, or keyway sizes available upon request.