Pay in installments of $7.50 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 6 - Aug 11
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Reparaturset für gesprungenes GlasSPAREN SIE GELD FR GESPRUNGENE BILDSCHIRME UND GLSER! Ihr Tag, an dem Sie sich um Glasrisse in Ihrem Sichtfeld sorgen mssen, ist vorbei! Dieses brandneue Reparaturset fr gesprungenes Glas lsst Sie wieder sicher im Aussehen Ihres Autos fhlen, whrend Sie wertvolle Zeit und Geld sparen. Dieses Set ist das einfachste, das Sie jemals zur Reparatur von Windschutzscheiben oder Glas verwenden werden. Das Reparaturset fr gesprungenes Glas beseitigt schnell und
SPAREN SIE GELD FÜR GESPRUNGENE BILDSCHIRME UND GLÄSER!
Ihr Tag, an dem Sie sich um Glasrisse in Ihrem Sichtfeld sorgen müssen, ist vorbei! Dieses brandneue Reparaturset für gesprungenes Glas lässt Sie wieder sicher im Aussehen Ihres Autos fühlen, während Sie wertvolle Zeit und Geld sparen. Dieses Set ist das einfachste, das Sie jemals zur Reparatur von Windschutzscheiben oder Glas verwenden werden.
Das Reparaturset für gesprungenes Glas beseitigt schnell und einfach Risse in der Windschutzscheibe, indem es mit hochwertigem Harz gefüllt wird. Drücken Sie einfach das Harz in die Risse, um beschädigte Fenster, Glas und Spiegel in wenigen Minuten zu reparieren!
Formuliert mit starken eindringenden Klebstoffen, die den Luftraum füllen, um das lose Glas zu binden. Es hilft Ihnen, Zeit und Geld zu sparen, während die Windschutzscheibe Ihres Autos aussieht, als wäre sie nie gesprungen. Für beste Ergebnisse sollten Reparaturen so schnell wie möglich nach dem Auftreten des Schadens durchgeführt werden, um weitere Risse zu vermeiden.
FUNKTIONEN:
- Schnelle Reparatur - Das Reparaturset für die Windschutzscheibe kann kleine Risse schnell und einfach in nur 20-30 Minuten reparieren. Das Reparaturset für die Windschutzscheibe verhindert die Ausbreitung von Schäden. Es stellt die Windschutzscheibe in nahezu neuwertigen Zustand wieder her. Langanhaltende Pflegeeffekte nur mit dem Reparaturset für die Windschutzscheibe.
- Einfach zu bedienen - Das Reparaturset für gesprungenes Glas ist einfach zu verwenden. Reinigen und trocknen Sie zunächst die Glasoberfläche der Windschutzscheibe und drücken Sie dann das Harz des Glasreparatursets in die Risse. Schaben Sie anschließend das verbleibende Harz mit einem Spachtel ab.
- Fortschrittliche Harzformel - Unsere fortschrittliche Harzformel füllt den Riss oder Chip ohne Rückstände oder Spuren und bietet gleichzeitig Widerstand gegen weitere Schäden mit einer transparenten Schutzschicht.
- Perfektes Design - DIY-Reparatur von Windschutzscheibenrissen/-chips in professioneller Qualität. Das Reparaturset für gesprungenes Glas ist mit einem verstärkten Injektionsversiegelungsstift, fortschrittlicher Harzformel und kann starken Druck erzeugen, gestaltet. Das Reparaturset für gesprungenes Glas hat eine Vakuumfunktion, um schnell Luft aus dem Riss zu entfernen. Es kann Ihnen helfen, das Erscheinungsbild zu minimieren, um bessere Reparatureffekte zu erzielen.
- Vielseitig einsetzbar - Dieses Windschutzscheiben-Reparaturset eignet sich für Reparaturen aller Arten von laminierten Fensterfliesen und Rissen, wie z.B. Insekten, Spinnweben, Bullseye, Halbmondrisse, sternförmige Schäden und Kombinationsschäden von weniger als 1 Zoll (25 mm) Durchmesser.
ANWENDUNG:
- Reinigen und trocknen Sie die Glasoberfläche der Windschutzscheibe und drücken Sie dann das Harz in die Risse.
- Legen Sie die Härtefolie auf, lassen Sie sie 5-10 Minuten trocknen und aushärten.
- Schließlich schaben Sie die Reste mit dem Rasiermesser ab.
SPEZIFIKATIONEN:
- Nettogewicht: 2 ml
DAS PAKET ENTHÄLT:
- 1 x Reparaturset für gesprungenes Glas
- 1 x Reparaturblatt
- 5 x Heilfilme
KEINE ZUFRIEDENHEIT, GELD-ZURÜCK-GARANTIE!
Wenn Sie aus irgendeinem Grund keine positive Erfahrung haben, bieten wir eine 30-Tage-Garantie und werden alles tun, um sicherzustellen, dass Sie mit Ihrem Kauf zufrieden sind.
Wir haben E-Mail-Support 7 Tage die Woche. Zögern Sie nicht, uns zu kontaktieren, wenn Sie Hilfe benötigen.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.4 ★★★★★
Based on 10 reviews
Sort
Product Reviews
★★★★★ 3
Does the job, but assembling by yourself is a nightmare
Size: 4 Panel-88'', Color: Black
Does it do the job? Yes, although as others said there are small gaps but it's not a huge deal. The price is also good. But the reason I'm giving it a 3/5 is simply because the assembly for this was a complete nightmare. I honestly don't think I would recommend this to anyone unless they have another person to help them assemble it, because doing it by myself was terrible. I don't think I'd buy this again, I think I'd opt to just spend a bit more money and save myself the trouble personally.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026
★★★★★ 4
Reasonably adequate room divider
Size: 4 Panel-88'', Color: Beige
I'm reviewing this as I assemble it.
Couple things:
1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky.
One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection.
Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it.
2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless.
3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together.
4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place.
5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options.
NOW on to the utility itself.
1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great!
2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world.
3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it.
All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2023
★★★★★ 5
Nice and strong
Color: Black, Size: Wheel-6 Panel
Nice and strong, tedious, putting together, but very good quality
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 17, 2026
★★★★★ 5
if you are going to be moving them a lot, buy something more sturdy.
Color: Black, Size: Wheel-6 Panel
I use these at our churchc.
They are pretty good, not terribly study and the screw that hold the faabric have pulled out in a couple of places.
But they wqould work especially well if you were not constantly moving them as we do.
They are a bit of a pain to assemble.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 20, 2026
★★★★★ 4
Easy to put together , decent quality
Color: Black, Size: Wheel-6 Panel
Purchased for office, easy to put together , durable quality , exactly what we needed to partition a small space
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 15, 2025